Hitachi CP-X430 user manual Troubleshooting, OSD Message, Message Contents

Page 21

01CP-S420/CP-X430 03.9.2 0:08 PM ページ 20

TROUBLESHOOTING

OSD Message

The messages as described below may appear on the screen at power ON. Take the appropriate measures when such messages appears.

Table 9. OSD Message

Message

Contents

 

 

CHANGE THE LAMP

The usage time of lamp will be reaching 2000 hr

AFTER REPLACING LAMP,

shortly.(*2)

RESET THE LAMP TIME.

It is recommended to replace the lamp soon. Prepare a

(*1)

new lamp as a replacement.

 

 

 

The usage time of lamp will be reaching 2000 hr shortly.

CHANGE THE LAMP

It is recommended to replace the lamp within * *

AFTER REPLACING LAMP,

hours.(*2)

RESET THE LAMP TIME.

It might be happened that the lamp is cut off before * * hr

THE POWER WILL TURN OFF

by any chance. Power will be switched OFF

AFTER ** hr.

automatically in * * hours. Replace the lamp as shown in

(*1)

P.17~18 “Lamp”. Always reset the lamp timer after

 

replacing the lamp.

 

 

CHANGE THE LAMP

The usage time of lamp is about to reach. Power will be

AFTER REPLACING LAMP,

switched OFF in a few minutes.(*2)

RESET THE LAMP TIME.

Switch power OFF immediately and replace the lamp as

THE POWER WILL

shown in P.17 ~18 “Lamp”. Always reset the lamp timer

TURN OFF

after replacing the lamp.

AFTER 0 hr.

 

 

 

NO INPUT IS DETECTED

No input signal found.

ON ***

Check signal input connections and signal sources.

 

 

 

The horizontal or vertical frequency of the input signal is

SYNC IS OUT OF RANGE

not within the specified range.

ON ***

Check the specifications of the equipment and the signal

 

source.

 

 

 

The internal temperature has risen.

 

Switch power OFF, and wait 20 minutes until the

 

equipment cools.

CHECK THE AIR FLOW

Check the following and Switch power ON again.

 

* Are the ventilation openings blocked.

 

* Is the air filter dirty.

 

* Is the ambient temperature in excess of 35°C.

 

 

NOTE (*1) This message is cleared automatically after approximately three minutes, and appears every time power is switched ON.

(*2) The unit has a function to turn the power off which will be active when the usage time reaches 2000 hr. However the life of lamp might be much different among lamps, so that it might be happened that a lamp is cut off before the function is active.

ENGLISH-20

Image 21
Contents CP-S420WA/CP-X430WA/CP-X430W CP-S420/CP-X430Contents Features Contents of PackageBefore USE Before USE Part NamesComponent Video Refer to P.9 Operations TransmitterLoading the Batteries Installation of the Projector and Screen InstallationAngle Adjustment Installation ReferenceInstallation CablingCabling Power Connection Example of System SetupPlug & Play Power OFF Power onOperations StandbyOperations Basic OperationBasic Operation Description Select Mode of P.IN P. Display Press the PinP button Normal menu Single menuMenu Display Start/Stop Press the Menu button Setup Menu Setup MenuAutomatic Adjustment at Video Input Select the Execute with Automatic Adjustment at RGB Input Select the Execute withInput Menu Input MenuImage Menu Description Image MenuStart UP MirrorOptions Menu Options MenuSelect Menu Background Color Select with the / button No Signal Menu No Signal Menu DescriptionReduce Increase Maintenance LampLamp Life Maintenance Resetting the Lamp TimerReplacing the Lamp Air Filter Other MaintenanceMessage Contents TroubleshootingOSD Message OSD MessageIndicators Message TroubleshootingIndicators Message IndicatorSymptom SymptomSymptom Possible cause Remedy Specifications SpecificationsWarranty and AFTER-SERVICE Dimension Diagram Signal Connector Pin AssignmentTechnical Technical Example of computer signalInitial set signals PS/2, ADB or Serial Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseSerial Mouse ADB MouseCommand data Communications settingRS-232C communication ProtocolChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Be EF CB D0 Regulatory Notices FCC Statement WarningFor the Customers in Canada Pour les utilisateurs au Canada Hitachi Europe S.r.1, Digital Media Group Hitachi Europe, Digital Media GroupHitachi Europe GmbH, Digital Media Group Hitachi Europe AB

CP-X430 specifications

The Hitachi CP-X430 is a versatile and high-performance portable projector designed to meet the needs of various environments, from classrooms to conference rooms. Renowned for its reliability and user-friendly features, this projector stands out in the market.

One of the main features of the CP-X430 is its powerful brightness, boasting an impressive 3,200 lumens. This high brightness level ensures that images are vivid and clear, even in well-lit rooms. The projector utilizes a 3LCD technology, which enhances color accuracy and produces life-like colors, making it ideal for presentations, educational purposes, and multimedia applications.

The CP-X430 has a native XGA resolution of 1024 x 768 pixels, providing sharp and detailed images. This resolution is particularly suitable for displaying text-heavy presentations and graphics, ensuring that viewers can easily read and interpret the content projected on the screen. Additionally, the unit supports various resolutions, including SVGA and WXGA, offering flexibility for different input sources.

In terms of connectivity, the CP-X430 includes multiple inputs, such as HDMI, VGA, and composite video, allowing users to connect a wide range of devices, from laptops to DVD players. This versatility makes it easy to integrate the projector into various setups, whether for corporate presentations or educational lectures.

Another characteristic worth noting is its lightweight and compact design, weighing just around 2.6 kg. This portability makes it easy to transport the projector from one location to another, making it a suitable choice for professionals who are frequently on the move.

The projector also features a long lamp life of up to 5,000 hours in Eco mode, minimizing maintenance requirements and reducing total cost of ownership. This extended lifespan helps ensure that the projector remains operational for extended periods, providing reliable performance for users.

Furthermore, the CP-X430 is designed with a range of user-friendly features, including a convenient remote control, intuitive on-screen menus, and quick setup options. These elements streamline the user experience, allowing for effortless operation, even for those who may not be tech-savvy.

In summary, the Hitachi CP-X430 is a robust and efficient projector that excels in various settings. With its high brightness, versatile connectivity, portability, and user-friendly design, it is poised to meet the demands of today's fast-paced work and learning environments, ensuring that presentations are impactful and memorable.