Hitachi CP-X430 user manual Requesting projector status Get command

Page 32

09CP-S420/CP-X430 03.9.9 2:13 PM ページ 7

TECHNICAL (continued)

Requesting projector status (Get command)

(1)Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) from the computer to the projector.

(2)The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.

Changing the projector settings (Set command)

(1)Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector.

(2)The projector changes the setting based on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Using the projector default settings (Reset Command)

(1)The computer sends the default setting code Header + Command data (‘06H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector changes the specified setting to the default value.

(3)The projector returns the response code ‘06H’ to the computer.

Increasing the projector setting value (Increment command)

(1)The computer sends the increment code Header + Command data (‘04H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector in creases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Decreasing the projector setting value (Decrement command)

(1)The computer sends the decrement code Header + Command data (‘05H’+‘00H’+ type (2 bytes) +‘00H’ + ‘00H’) to the projector.

(2)The projector decreases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

When a command sent by the projector cannot be understood by the computer

When the command sent by the projector cannot be understood, the error command ‘15H’ is returned by the computer. Some times, the projector ignores RS-232C commands during other works. If the error command ‘15H’ is returned, please send the same command again.

When data sent by the projector cannot be practice

When the command sent by the projector cannot be practiced, the the error code ‘1cH’ +‘xxxxH’ is returned.

When the data length is greater than indicated by the data length code, the projector will ignore the excess data code.

Conversely, when the data length is shorter than indicated by the data length code, an error code will be returned to the projector.

NOTEOperation cannot be guaranteed when the projector receives an undefined command or data.

Provide an interval of at least 40ms between the response code and any other code.

The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.

Commands are not accepted during warm-up.

TECHNICAL

TECHNICAL - 7

Image 32
Contents CP-S420/CP-X430 CP-S420WA/CP-X430WA/CP-X430WContents Before USE FeaturesContents of Package Component Video Before USEPart Names Transmitter Refer to P.9 OperationsLoading the Batteries Installation Installation of the Projector and ScreenAngle Adjustment Installation ReferenceCabling InstallationCabling Plug & Play Power ConnectionExample of System Setup Power on Power OFFOperations StandbyBasic Operation Description OperationsBasic Operation Menu Display Start/Stop Press the Menu button Select Mode of P.IN P. Display Press the PinP buttonNormal menu Single menu Setup Menu Setup MenuAutomatic Adjustment at RGB Input Select the Execute with Automatic Adjustment at Video Input Select the Execute withInput Menu Input MenuImage Menu Image Menu DescriptionStart UP MirrorSelect Menu Background Color Select with the / button Options MenuOptions Menu Reduce Increase No Signal MenuNo Signal Menu Description Lamp Life MaintenanceLamp Replacing the Lamp MaintenanceResetting the Lamp Timer Other Maintenance Air FilterTroubleshooting Message ContentsOSD Message OSD MessageTroubleshooting Indicators MessageIndicators Message IndicatorSymptom Possible cause Remedy SymptomSymptom Specifications SpecificationsWarranty and AFTER-SERVICE Technical Dimension DiagramSignal Connector Pin Assignment Example of computer signal TechnicalInitial set signals Connection to the Mouse Control PS/2, ADB or Serial MouseUSB Mouse PS/2 MouseADB Mouse Serial MouseCommunications setting Command dataRS-232C communication ProtocolRequesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Be EF CB D0 For the Customers in Canada Pour les utilisateurs au Canada Regulatory NoticesFCC Statement Warning Hitachi Europe, Digital Media Group Hitachi Europe S.r.1, Digital Media GroupHitachi Europe GmbH, Digital Media Group Hitachi Europe AB

CP-X430 specifications

The Hitachi CP-X430 is a versatile and high-performance portable projector designed to meet the needs of various environments, from classrooms to conference rooms. Renowned for its reliability and user-friendly features, this projector stands out in the market.

One of the main features of the CP-X430 is its powerful brightness, boasting an impressive 3,200 lumens. This high brightness level ensures that images are vivid and clear, even in well-lit rooms. The projector utilizes a 3LCD technology, which enhances color accuracy and produces life-like colors, making it ideal for presentations, educational purposes, and multimedia applications.

The CP-X430 has a native XGA resolution of 1024 x 768 pixels, providing sharp and detailed images. This resolution is particularly suitable for displaying text-heavy presentations and graphics, ensuring that viewers can easily read and interpret the content projected on the screen. Additionally, the unit supports various resolutions, including SVGA and WXGA, offering flexibility for different input sources.

In terms of connectivity, the CP-X430 includes multiple inputs, such as HDMI, VGA, and composite video, allowing users to connect a wide range of devices, from laptops to DVD players. This versatility makes it easy to integrate the projector into various setups, whether for corporate presentations or educational lectures.

Another characteristic worth noting is its lightweight and compact design, weighing just around 2.6 kg. This portability makes it easy to transport the projector from one location to another, making it a suitable choice for professionals who are frequently on the move.

The projector also features a long lamp life of up to 5,000 hours in Eco mode, minimizing maintenance requirements and reducing total cost of ownership. This extended lifespan helps ensure that the projector remains operational for extended periods, providing reliable performance for users.

Furthermore, the CP-X430 is designed with a range of user-friendly features, including a convenient remote control, intuitive on-screen menus, and quick setup options. These elements streamline the user experience, allowing for effortless operation, even for those who may not be tech-savvy.

In summary, the Hitachi CP-X430 is a robust and efficient projector that excels in various settings. With its high brightness, versatile connectivity, portability, and user-friendly design, it is poised to meet the demands of today's fast-paced work and learning environments, ensuring that presentations are impactful and memorable.