High Voltage High Temperature | Hitachi CP-A300N instruction

Replacing the lamp (continued)

HIGH VOLTAGE

HIGH TEMPERATURE

HIGH PRESSURE

WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, if the bulb bursts, it is possible

for shards of glass to fly into the lamp housing, and for gas containing mercury and dust containing fine particles of glass to escape from the projector’s vent holes.

►About disposal of a lamp: This product contains a mercury lamp; do not put it in a trash. Dispose of it in accordance with environmental laws.

•For lamp recycling, go to www.lamprecycle.org (in the US).

•For product disposal, consult your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada).

For more information, ask your dealer.

•If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projector’s internals, or cause injury during handling,

so please do not try to clean the projector or replace the lamp yourself.

Disconnect • If the lamp should break (it will make a loud bang when it does), ventilate the

the plug	room well, and make sure not to inhale the gas or fine particles that come out
from the	from the projector's vent holes, and not to get them into your eyes or mouth.
power
outlet	• Before replacing the lamp, turn the projector off and unplug the power
	cord, then wait at least 45 minutes for the lamp to cool sufficiently.
	Handling the lamp while hot can cause burns, as well as damaging the lamp.
	• Never unscrew except the appointed (marked by an arrow) screws.
	• Do not open the lamp cover while the projector is mounted on a wall or ceiling.
	This is dangerous, since if the lamp’s bulb has broken, the shards will fall out
	when the cover is opened. In addition, working in high places is dangerous, so
	ask your local dealer to have the lamp replaced even if the bulb is not broken.
	• Do not use the projector with the lamp cover removed. At the lamp
	replacing, make sure that the screws are screwed in firmly. Loose
	screws could result in damage or injury.
	• Use only the lamp of the specified type. Use of a lamp that does not
	meet the lamp specifications for this model could cause a fire, damage or
	shorten the life of this product.
	• If the lamp breaks soon after the first time it is used, it is possible
	that there are electrical problems elsewhere besides the lamp. If this
	happens, consult your local dealer or a service representative.
	• Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
	• Using the lamp for long periods of time, could cause it dark, not to light
	up or to burst. When the pictures appear dark, or when the color tone
	is poor, please replace the lamp as soon as possible. Do not use old
	(used) lamps; this is a cause of breakage.

CP-A300N specifications

The Hitachi CP-A300N is a groundbreaking projector designed for a range of environments, including classrooms, conference rooms, and other professional settings. This compact model stands out for its high-quality image projection and user-friendly features, making it a preferred choice for educators and business professionals alike.

One of the standout features of the CP-A300N is its ultra-short throw technology. This allows the projector to be placed very close to the screen, enabling it to project large images even in small spaces. With a projection ratio of just 0.43:1, users can achieve a 100-inch image from only inches away, significantly reducing shadows and glare that can be a distraction during presentations.

The projector delivers impressive image clarity and brightness, with a resolution of 1280 x 800 pixels and a brightness of 3,000 ANSI lumens. This ensures that images and text appear sharp and vibrant, even in well-lit environments. The CP-A300N supports a wide color gamut, showcasing rich and lifelike colors that enhance the overall viewing experience.

Interactivity is another key feature of the Hitachi CP-A300N. The device can be used with various interactive whiteboard solutions, enabling collaborative learning and dynamic presentations. This makes it an excellent tool for educators who wish to engage their students in a more interactive manner.

In terms of connectivity, the CP-A300N is equipped with a variety of options, including HDMI, VGA, USB, and even a wireless option for seamless connectivity with devices like laptops and tablets. This versatility allows users to connect multiple devices easily, facilitating a smooth transition during presentations.

The CP-A300N is designed with energy efficiency in mind. It features a long lamp life of up to 5,000 hours in eco mode, which not only reduces the cost of ownership but also minimizes environmental impact. Additionally, the easy maintenance design means that replacing the lamp or filters is a straightforward process, saving valuable time and effort.

With its combination of ultra-short throw projection, high-quality imaging, interactive capabilities, and user-friendly features, the Hitachi CP-A300N is a versatile and reliable choice for any professional setup. It effectively meets the needs of modern presentations and learning environments, solidifying Hitachi’s reputation as a leader in projection technology.