Hitachi CP-RX70 user manual Message, Source Name

Page 35
5174%'0#/'

SCREEN Menu

SCREEN Menu (continued)

Item

Description

Using the ▲/▼ buttons turns on/off the message function.

TURN ON ó TURN OFF

 

When the TURN ON is selected, the following message function works.

 

“AUTO IN PROGRESS” while automatically adjusting

 

“NO INPUT IS DETECTED”

 

“SYNC IS OUT OF RANGE”

 

“Searching….” while searching for the input

MESSAGE

“Detecting….” while an input signal is detected

 

The indication of the input signal displayed by changing

 

The indication of the aspect ratio displayed by changing

 

The indication of the PICTURE MODE displayed by changing

 

The indication of the MY MEMORY displayed by changing

 

The indication of “FREEZE” and “II” while freezing the screen by

 

pressing the FREEZE button.

•When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (19).

Each input port for this projector can have a name applied to it.

(1)Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button.

The SOURCE NAME menu will be displayed.

 

(2) Use the ▲/▼ buttons on the SOURCE

%1/276'4016'2%

 

 

%1/276'4&'5-6122%

 

 

58+&'1%#/'4#

 

 

NAME menu to select the port to be named

 

 

8+&'1864

 

 

 

and press the ► button. Right side of the

 

 

 

 

 

 

 

menu is blank until a name is specified.

 

 

 

 

The SOURCE NAME dialog will be displayed.

0#/'016'2%

5'.'%6

 

 

 

 

016'2%



 

 

(3) The current name will be displayed on the

 

 

 

#$%&'()*+,-./0



 

first line. Use the ▲/▼/◄/► buttons and the

123456789:;<

 

 

 

CDEFGHIJKLMNOP

 

 

ENTER or INPUT button to select and enter

QRSTUVWXYZ[\

 

 



 

 

characters. The RESET button can be used to

 

 

A!

 

 

SOURCE NAME

erase 1 character at a time. The name can be a

4'5'637+6

'06'40':6

 

 

 

maximum of 16 characters.

0#/'016'2%

5'.'%6

 

 

 

 

(4) To change an already inserted character, press

0162%



 

 

 

 

 

the ▲ button while the cursor is on the [A-N]

#$%&'()*+,-./0



 

123456789:;<

 

 

 

row to move the cursor to the name displayed on

CDEFGHIJKLMNOP

 

 

QRSTUVWXYZ[\

 

 

the first line and use the ◄/► buttons to select



 

 

A!

 

 

 

character to be changed. Once a character in the

 

 

 

4'5'637+6

'06'40':6

 

name is selected use the ▼ button to move the

 

5'.'%6

 

 

cursor back down to the character entry area to

0#/'016'2%

 

 

016'2%



 

 

select and enter characters as described above.

 

 

 

#$%&'()*+,-./0



 

(5) Select

and press the ENTER or

123456789:;<

 

 

 

CDEFGHIJKLMNOP

 

 

INPUT buttons when finished entering text.

QRSTUVWXYZ[\

 

 



 

 

To revert to the previous name without

A!

 

 

 

 

 

 

 

saving changes press the ESC or ◄ button

4'5'637+6

'06'40':6

 

and the INPUT button simultaneously.

 

 

 

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Content Replacing the filter cover for bottom-up use Contents of packageFastening the lens cover Bottom Part namesProjector HOT3 4 5 Remote controlBack Remote control Control panelSuspended from the ceiling Setting upArrangement On a horizontal surfaceSetting up VCR/DVD player Connecting your devicesAbout Plug-and-Play capability Connecting your devicesSecurity slot Connecting power supplyUsing the security slot Putting batteries Remote controlChanging the frequency of remote control signal About the remote control signalTurning off the power Power on/offTurning on the power Operating Adjusting the volumeSelecting an input signal 31, the volume adjustment is disable For no signal Searching an input signalSelecting an input signal  For a PC signalFocus ring Adjusting the projectors elevatorAdjusting the zoom and focus Adjusting the position Using the automatic adjustment featureCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenAdvanced Menu Using the menu functionEasy Menu Keystone Picture ModeDescription AspectEasy Menu Gamma Picture MenuCustom and then pressing the button or Using the / buttons switches the color temperature modeSelecting a mode whose name includes Picture MenuSAVE1, SAVE2, SAVE3, SAVE4 MY MemoryLOAD1, LOAD2, LOAD3, LOAD4 Over Scan Using the / buttons switches the mode for aspect ratio43 ó 169 ó Small For no signal Image MenuSize PhaseAuto Adjust Image MenuColor Space Input MenuProgressive Video NRFrame Lock Input MenuVideo Format Resolution Audio Setup MenuVolume Blank Screen MenuStart UP Screen MenuMyScreen registration is finished Capturing error has occurred. Please try againMyScreen Source Name MessageAuto OFF Option MenuAuto Search Auto onMY Button Option MenuLamp Time Disappear ghost Service FAN SpeedSelect a color element of ghost using Buttons GhostRemote Freq ServiceFilter Message KEY LockFrame Lock message on the dialog means the frame lock Factory ResetInformation It shows the information about the current inputSecurity Using Security FeaturesInputting the Password Changing the PasswordSetting the Password Using the MyScreen Password FunctionDescription If you have forgotten your Password Turning on the MyScreen PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off SecurityIf you have forgotten your PIN Code Turning Off the PIN Lock FunctionType number DT00781 Replacing the lamp MaintenanceCase of replacement by yourself LampLamp Lamp warningFilter cover Cleaning the air filterAir filter Type number MU03602Page Related messages TroubleshootingThere is no input signal Internal temperature is risingRegarding the indicator lamps Shutting the projector down Resetting all settingsRegarding the indicator lamps Input changeover settings are mismatched Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workPlay monitor Color settings are not correctly adjustedColor Space setting is not suitable Not properly adjustedAir filter MU03602 SpecificationsSpecification

CP-RX70 specifications

The Hitachi CP-RX70 is a versatile and powerful LCD projector designed for both educational and business environments. This model stands out with its compact size and lightweight design, making it highly portable while still offering reliable performance. With a resolution of 1024 x 768 pixels (XGA) and a brightness of 2700 ANSI lumens, the CP-RX70 ensures that presentations are clear, vibrant, and visible even in well-lit rooms.

One of the key features of the CP-RX70 is its advanced color technology. Hitachi utilizes a threeLCD system that enhances color reproduction, delivering rich and accurate colors for various content presentations. This makes it particularly suitable for displaying detailed images, charts, and videos, ensuring that every visual component is depicted with clarity and vibrancy.

The projector also boasts a contrast ratio of 600:1, providing deeper blacks and brighter whites that enhance the overall image quality. This level of contrast is essential for presentations that require nuanced visuals, making them more engaging and impactful for the audience.

In terms of connectivity, the Hitachi CP-RX70 offers multiple input options, including HDMI, VGA, and composite video, allowing users to easily connect various devices, such as laptops, DVD players, and document cameras. This flexibility in connectivity ensures that users can switch between devices with minimal hassle, enhancing the overall user experience during meetings or classes.

Hitachi has also integrated several convenient features to improve usability. The projector includes a built-in speaker, which adds to the overall functionality, negating the need for external audio for most presentations. Furthermore, the CP-RX70 comes with a remote control, providing users with a seamless way to operate the projector from a distance.

Another notable characteristic of this model is its energy-efficient design. The CP-RX70 has an eco mode that reduces power consumption and extends the life of the lamp, which can last up to 5,000 hours. This not only lowers operating costs but also contributes to environmental sustainability.

Overall, the Hitachi CP-RX70 is designed to meet the demands of modern presentations, combining portability, rich image quality, and user-friendly features to create a practical solution for educators and professionals alike.
Top Page Image Contents