Hitachi CP-RX70 user manual Shutting the projector down, Resetting all settings

Page 51

Troubleshooting

Regarding the indicator lamps (continued)

POWER

LAMP

TEMP

Description

indicator

indicator

indicator

 

 

 

 

 

 

 

 

There is a possibility that the interior portion

 

 

 

has become heated.

 

 

 

Please turn the power off, and allow the projector to

Blinking

 

 

cool down at least 20 minutes. After the projector has

 

 

sufficiently cooled down, please make confirmation of

In Red

Turned

Lighting

the following items, and then turn the power on again.

or

off

In Red

• Is there blockage of the air passage aperture?

Lighting

 

 

• Is the air filter dirty?

In Red

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

please set FAN SPEED of the SERVICE item in the

 

 

 

OPTION menu to HIGH.

 

 

 

It is time to clean the air filter.

Lighting

Simultaneous

Please immediately turn the power off, and clean or

change the air filter referring to the section “Air Filter”.

In Green

blinking in Red

After cleaning or changing the air filter, please be sure

 

 

 

to reset the filter timer.

 

 

 

After the remedy, reset the power to ON.

 

 

 

There is a possibility that the interior portion

Lighting

Alternative

has become overcooled.

Please use the unit within the usage temperature

In Green

blinking in Red

parameters (5°C to 35°C).

 

 

 

 

 

 

After the treatment, reset the power to ON.

NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

Shutting the projector down

Only when the projector can not be turned off by usual procedure (13), please push the shutdown switch using a pin or similar, and disconnect the power plug from the power outlet. Before turning it on again, wait at least 10 minutes to make the projector cool down enough.

Resetting all settings

COMPUTER IN1 COMPUTER IN2

Shutdown switch

When it is hard to correct some wrong settings, the FACTORY RESET function of the SERVICE item in the OPTION menu (40) can reset all settings(except LANGUAGE, FILTER TIME, LAMP TIME, FILTER MESSAGE and etc.) to the factory default.

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Content Contents of package Fastening the lens coverReplacing the filter cover for bottom-up use Bottom Part namesProjector HOT3 4 5 Remote controlBack Remote control Control panelSuspended from the ceiling Setting upArrangement On a horizontal surfaceSetting up VCR/DVD player Connecting your devicesAbout Plug-and-Play capability Connecting your devicesConnecting power supply Using the security slotSecurity slot Putting batteries Remote controlChanging the frequency of remote control signal About the remote control signalPower on/off Turning on the powerTurning off the power Operating Adjusting the volumeSelecting an input signal 31, the volume adjustment is disable For no signal Searching an input signalSelecting an input signal  For a PC signalAdjusting the projectors elevator Adjusting the zoom and focusFocus ring Adjusting the position Using the automatic adjustment featureCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenUsing the menu function Easy MenuAdvanced Menu Keystone Picture ModeDescription AspectEasy Menu Gamma Picture MenuCustom and then pressing the button or Using the / buttons switches the color temperature modeSelecting a mode whose name includes Picture MenuMY Memory LOAD1, LOAD2, LOAD3, LOAD4SAVE1, SAVE2, SAVE3, SAVE4 Over Scan Using the / buttons switches the mode for aspect ratio43 ó 169 ó Small For no signal Image MenuSize PhaseAuto Adjust Image MenuColor Space Input MenuProgressive Video NRInput Menu Video FormatFrame Lock Resolution Setup Menu VolumeAudio Blank Screen MenuStart UP Screen MenuCapturing error has occurred. Please try again MyScreenMyScreen registration is finished Source Name MessageAuto OFF Option MenuAuto Search Auto onOption Menu Lamp TimeMY Button Disappear ghost Service FAN SpeedSelect a color element of ghost using Buttons GhostRemote Freq ServiceFilter Message KEY LockFrame Lock message on the dialog means the frame lock Factory ResetInformation It shows the information about the current inputSecurity Using Security FeaturesInputting the Password Changing the PasswordSetting the Password Using the MyScreen Password FunctionDescription If you have forgotten your Password Turning on the MyScreen PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off SecurityIf you have forgotten your PIN Code Turning Off the PIN Lock FunctionType number DT00781 Replacing the lamp MaintenanceCase of replacement by yourself LampLamp Lamp warningFilter cover Cleaning the air filterAir filter Type number MU03602Page Related messages TroubleshootingThere is no input signal Internal temperature is risingRegarding the indicator lamps Resetting all settings Regarding the indicator lampsShutting the projector down Input changeover settings are mismatched Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workPlay monitor Color settings are not correctly adjustedColor Space setting is not suitable Not properly adjustedSpecifications SpecificationAir filter MU03602

CP-RX70 specifications

The Hitachi CP-RX70 is a versatile and powerful LCD projector designed for both educational and business environments. This model stands out with its compact size and lightweight design, making it highly portable while still offering reliable performance. With a resolution of 1024 x 768 pixels (XGA) and a brightness of 2700 ANSI lumens, the CP-RX70 ensures that presentations are clear, vibrant, and visible even in well-lit rooms.

One of the key features of the CP-RX70 is its advanced color technology. Hitachi utilizes a threeLCD system that enhances color reproduction, delivering rich and accurate colors for various content presentations. This makes it particularly suitable for displaying detailed images, charts, and videos, ensuring that every visual component is depicted with clarity and vibrancy.

The projector also boasts a contrast ratio of 600:1, providing deeper blacks and brighter whites that enhance the overall image quality. This level of contrast is essential for presentations that require nuanced visuals, making them more engaging and impactful for the audience.

In terms of connectivity, the Hitachi CP-RX70 offers multiple input options, including HDMI, VGA, and composite video, allowing users to easily connect various devices, such as laptops, DVD players, and document cameras. This flexibility in connectivity ensures that users can switch between devices with minimal hassle, enhancing the overall user experience during meetings or classes.

Hitachi has also integrated several convenient features to improve usability. The projector includes a built-in speaker, which adds to the overall functionality, negating the need for external audio for most presentations. Furthermore, the CP-RX70 comes with a remote control, providing users with a seamless way to operate the projector from a distance.

Another notable characteristic of this model is its energy-efficient design. The CP-RX70 has an eco mode that reduces power consumption and extends the life of the lamp, which can last up to 5,000 hours. This not only lowers operating costs but also contributes to environmental sustainability.

Overall, the Hitachi CP-RX70 is designed to meet the demands of modern presentations, combining portability, rich image quality, and user-friendly features to create a practical solution for educators and professionals alike.
Top Page Image Contents