NEC XT9000 user manual Menu Descriptions & Functions Source Select, Swicher, Entry List, Sdi

Page 36

Menu Descriptions & Functions Source Select

Enables you to select a video source such as a VCR, DVD player, laser disc player, computer or document camera depending on what is connected to your inputs.

Press the up/down buttons on your remote control or the projector cabi- net to highlight the menu for the item you want to adjust.

* RGB1,2,3

* S-Video 1, 2

* Component (YCbCr)

* RGB (Digital)

* Video 1, 2

* SDI

Swicher

You can select the slot number from 1 to 10 of the Switcher(s) ISS- 6020.

When using with a single Switcher ISS-6020:

Use the SELECT ▲ or ▼ button to select the desired slot number from 1 to 10 of the ISS-6020 Swicher and press ENTER.

When using with two or more Switcher ISS-6020:

Use the SELECT ▲ or ▼ button to select the master slot number from 1 to 10 and then the slave slot number from 1 to 10 on the Select Slot menu. Select OK and press ENTER.

To close the window without storing the settings, select Cancel and press ENTER.

Entry List

Displays the list of the entry signals. Use the ▲▼ buttons on your re- mote control or the projector cabinet to select the signal and press the ENTER button on the remote control or the projector cabinet to project the image of the selected source.

Entry Edit Command

You can edit the signal on the entry list.

To do so:

While pressing and holding CTL, press ENTER on the remote control to display the Entry Edit Command window.

*Cut Enables you to remove a selected signal from the list and place it on the "clipboard" in the projector.

*Copy Enables you to copy a selected signal from the list and place it on the "clipboard" in the projector.

*Paste Enables you to paste the signal placed on the "clipboard" to any other line of the list. To do this, select "Paste" and then select the line number you want to paste to. Last press ENTER.

*Edit Enables you to change source name or assign the direct key.

*The following buttons are not available for the currently projecting signals:

1)The Cut and Paste buttons on the Entry Edit Command screen

2)The Input Terminal button on the Entry Edit screen

When complete, select OK and press ENTER. To exit without stor- ing the settings, select Cancel.

Select "Source Name" and press ENTER to display the Source Name Edit window. You can change source name on this window.

Select "Input Terminal" and press ENTER to display the Input Termi- nal window. You can change input terminal on this window.

RGB1, RGB2, RGB3, and RGB(DIGITAL) can be selected for RGB signals; RGB1, RGB2, Component, and RGB(DIGITAL) can be se- lected for component signals; Video 1/2, S-Video 1/2 , and RGB(DIGITAL) can be selected for Video and S-Video signals.

To return to the original Video signal after the video signal has been changed to the RGB signal, enter the signal into the Entry List as a new one.

Select "Direct Key" and press ENTER to display the Direct Key win- dow.

You can assign specific remote keys for direct signal input selection.

NOTE: Existing direct key settings are overwritten with new settings.

E – 29

Page 35 Page 37
Image 36
Page 35 Page 37
Contents XT9000 User’s Manual Gsgv Acoustic Noise Information Ordinance AvertissementImportant Safeguards Recommandations importantes ’attention du revendeur ou de l’installateurAlimentation NettoyageThis warranty may be enforced only by the first purchaser For More INFORMATION, Telephone NEC TECHNOLOGIES, INC1250 N. Arlington Heights Road, Suite Itasca. Illinois Table of Contents Features youll enjoy IntroductionIntroduction to the XT9000 Projector Getting StartedPart Names and Functions Controls Terminal Panel For the optional XT SDI boardInput 3 RGB Connector Mini D-Sub 15 pin Option Connector Mini D-Sub 9 pinRemote 1 Connector Mini D-Sub 15 pin RGB Digital Input/Output Connectors DVI-D 24 pinRemote Control Select Up/Down/Left/RightAuto RGB only Remote Control Precautions Remote Control Battery InstallationInstallation Setting Up Your ProjectorThrow Distance Screen Size and Projection Distance TL-08SF TL-1ZH TL-2Z TL-4ZLens Shift Adjustable Range Maximum Possible Range for TL-1ZH, TL-2Z and TL-4ZFixed Lens TL-08SF Desktop/ Front VerticalMoving The Projector Selecting a LocationSetup Connecting the Power Cable and Turning on the ProjectorSet up the projector Focus + MAGNIFY/ Zoom + CTLSetting up for Double Stacking in Link Mode Stacking the ProjectorsHookup Link Mode Setting Display the internal crosshatch test patternProjector Orientation Ceiling Front ProjectionCeiling Rear Projection Desktop Rear ProjectionWhen used in standalone operation Connecting Your PC Or Macintosh ComputerConnecting Your Document Camera Connecting Your VCR Or Laser Disc PlayerWhen Used with One Switcher ISS-6020/ISS-6020G To REMOTE1 To InputWhen Used with Two or More Switchers 100 Inputs How to make connectionsISS-6020 Output to Setting of S8601 Set the DIP switch S8601 of the Switcher as followsRemote 1 Connector When used with the Switcher Pin NoPin Configuration of Optional CTL-6010 Cable When used in stand alone operation Operating Multiple Projectors with the Remote Control Projector ID= Remote Address =Using the RGB Digital connectors Connection for Double Stacking in Link ModeLink Mode Connecting a PC with the RGB digital connectorUsing The Menus OperationGeneral Controls Shutter mechanismList of Direct Key Combinations Menu Tree Stand aloneAdvanced Menu Menu Elements Entry Edit Command Menu Descriptions & Functions Source SelectSwicher Entry ListAdjust Source White BalancePicture ImageVideo Adj Option Adj Volume Ref AdjLens Memory KeystoneFactory Default TimerProjector Options LampMenu Setup Switcher Control Contents PC Card FilesHelp Source InformationLink Mode Test PatternSpecifications OpticalElectrical Mechanical USAVcci Oceania EN60950 AS/NZS3548 Class a AsiaRemote 3 XLR Pin Assignments and Signals Pin No Signal GroundCeiling Mount Kit XL CmkitCompatible Input Signal List SGIVesa Power Lens ShiftFocus ZoomDimensions AppendixTips on Adjusting Focus for Lens Memory Function Adjusting the FocusPreparation Recommend Warm up the projector for about 60 minutes7N8P0381

XT9000 specifications

The NEC XT9000 is a high-performance display solution designed for a wide range of applications, including corporate, educational, and retail environments. Known for its cutting-edge features and advanced technologies, the XT9000 series offers an exceptional viewing experience that enhances presentations, advertising, and information dissemination.

One of the standout characteristics of the NEC XT9000 is its impressive image quality. The display utilizes a high-resolution panel that provides crisp and vibrant visuals, making content more engaging and impactful. With a contrast ratio that excels in both brightly lit and dimly lit environments, the XT9000 ensures that images remain sharp and colors are accurately represented, contributing to a more immersive viewing experience.

The XT9000 series also incorporates advanced calibration technologies. With features such as automatic color calibration and ambient light sensors, the display intelligently adjusts its brightness and color settings based on the surrounding environment. This adaptability maximizes visibility and minimizes eye strain for viewers.

In terms of connectivity, the NEC XT9000 is equipped with a wide range of input options, including HDMI, DisplayPort, and legacy connectors. This versatility allows seamless integration with various devices, from laptops and media players to digital signage systems. Furthermore, the built-in content management system provides users with the ability to schedule and control media playback efficiently, making it ideal for digital signage applications.

The robust design of the XT9000 is another key feature. Engineered for durability, it can withstand the rigors of constant use in busy environments. It also includes a fanless design, which reduces noise and enhances reliability. The display's energy-efficient technology contributes to lower operational costs, making it a sustainable choice for businesses and organizations.

Moreover, the NEC XT9000 supports advanced display configurations, enabling users to create multi-screen setups with ease. This feature is particularly beneficial for large presentations or events requiring attention-grabbing visuals across multiple displays. The XT9000 series is also compatible with NEC's software solutions, allowing for streamlined control and monitoring of multiple display units.

Overall, the NEC XT9000 stands out as a versatile and powerful display solution, equipped with features that cater to the needs of modern businesses and institutions. With its high-quality visuals, smart technologies, and robust build, it is designed to meet the demands of various professional environments, making it a reliable choice for any display application.
Top Page Image Contents