NEC XT9000 user manual Menu

Page 42

5.To enable your setting, select Active on the Execute Switch.

6.Select OK and press the ENTER button on the remote control to complete the setting.

NOTE: When On Timer is set and the projector is in the standby mode, the Status indicator flashes green to show that On Timer program is active. The projector must be in stand-by mode at the time of turning on. The preset power-on time will be void if the cooling fan is working or an error occurs. Unplugging the projector cancels your 1 Week programs regardless of whether the program was executed or not. However, your Every Week pro- gram will not be cancelled even if you unplug the projector.

Sleep Timer

1.Select your desired time between 30 minutes and 2 hours in 30 minute increments.

2.Select Set and press the ENTER button on the remote control.

3.The remaining time starts counting down.

4.The projector will turn off after the countdown is complete.

Menu

[Page 1]

Allows you to set preferences for the on-screen menu. Press "OK" to save your changes for all the features.

Menu Mode

This feature allows you to select two menu modes: Advanced Menu and Basic Menu.

Advanced Menu

This is the menu that contains all the available menus

 

and commands.

Basic Menu

This is the factory preset menu that contains the basic

 

menus and commands. You cannot customize this

 

menu.

The factory default Basic menu includes:

Source Select (RGB1/2/3, Component(YCbCr), Video1/2, S-Video1/ 2, RGB (Digital), SDI and Entry List), Brightness, Contrast, Pixel Adjust and Position.

Language

You can choose one of seven languages for on-screen instructions. The options are: English, German, French, Italian, Spanish, Swedish and Japanese.

Menu Display Time

This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.

The preset choices are "Manual", "Auto 5 sec", "Auto 10 sec", and "Auto 30 sec". The "Manual" is the factory preset.

Manual ......... The menu can be turned off manually.

Auto 5 sec .... The menu will automatically be turned off in 5 seconds if no

buttons are pressed within 5 seconds.

Auto 10 sec .. The menu will automatically be turned off in 10 seconds if no buttons are pressed within 10 seconds.

Auto 30 sec .. The menu will automatically be turned off in 30 seconds if no buttons are pressed within 30 seconds.

[Page 2]

Display Select

You can choose the desired status information to be displayed on the screen. The desired status information will be displayed each time you switch between sources.

Date Format

Eight display formats can be selected. This date format sets the current date that appears on the upper left corner of the screen.

Date, Time Preset

Setting the Current Date and Time

You can set the current time, month, date, and year.

1.Type in date.

Enter month, date and year in this order using INPUT buttons on the re- mote control.

Month and date must be entered in two digits. For example, to display "February", press "0" and "2".

2.Type in time.

Time is expressed in the 24-hour format. For example, 6:00 p.m. is en- tered as 18:00.

3.Select "OK" and press ENTER.

Closing the window allows the clock to start.

The current year, month, date and time are displayed on the top of the screen.

NOTE: The projector has a built-in clock. The clock will keep working for about 3 days after the main power is turned off. If the main power is off for 3 days or more, the built-in clock will be reset. If the built-in clock is reset, set the date and time again. The built-in clock will not reset while in the standby condition.

E – 35

Page 41 Page 43
Image 42
Page 41 Page 43
Contents XT9000 User’s Manual Gsgv Acoustic Noise Information Ordinance AvertissementImportant Safeguards Alimentation Recommandations importantes’attention du revendeur ou de l’installateur NettoyageThis warranty may be enforced only by the first purchaser For More INFORMATION, Telephone NEC TECHNOLOGIES, INC1250 N. Arlington Heights Road, Suite Itasca. Illinois Table of Contents Introduction to the XT9000 Projector Features youll enjoyIntroduction Getting StartedPart Names and Functions Controls Terminal Panel For the optional XT SDI boardRemote 1 Connector Mini D-Sub 15 pin Input 3 RGB Connector Mini D-Sub 15 pinOption Connector Mini D-Sub 9 pin RGB Digital Input/Output Connectors DVI-D 24 pinRemote Control Select Up/Down/Left/RightAuto RGB only Remote Control Precautions Remote Control Battery InstallationThrow Distance Screen Size and Projection Distance InstallationSetting Up Your Projector TL-08SF TL-1ZH TL-2Z TL-4ZFixed Lens TL-08SF Lens Shift Adjustable RangeMaximum Possible Range for TL-1ZH, TL-2Z and TL-4Z Desktop/ Front VerticalMoving The Projector Selecting a LocationSetup Connecting the Power Cable and Turning on the ProjectorSet up the projector Focus + MAGNIFY/ Zoom + CTLSetting up for Double Stacking in Link Mode Stacking the ProjectorsHookup Link Mode Setting Display the internal crosshatch test patternCeiling Rear Projection Projector OrientationCeiling Front Projection Desktop Rear ProjectionConnecting Your Document Camera When used in standalone operationConnecting Your PC Or Macintosh Computer Connecting Your VCR Or Laser Disc PlayerWhen Used with One Switcher ISS-6020/ISS-6020G To REMOTE1 To InputWhen Used with Two or More Switchers 100 Inputs How to make connectionsISS-6020 Output to Setting of S8601 Set the DIP switch S8601 of the Switcher as followsRemote 1 Connector When used with the Switcher Pin NoPin Configuration of Optional CTL-6010 Cable When used in stand alone operation Operating Multiple Projectors with the Remote Control Projector ID= Remote Address =Link Mode Using the RGB Digital connectorsConnection for Double Stacking in Link Mode Connecting a PC with the RGB digital connectorGeneral Controls Using The MenusOperation Shutter mechanismList of Direct Key Combinations Menu Tree Stand aloneAdvanced Menu Menu Elements Swicher Entry Edit CommandMenu Descriptions & Functions Source Select Entry ListPicture Adjust SourceWhite Balance ImageVideo Adj Option Adj Lens Memory VolumeRef Adj KeystoneProjector Options Factory DefaultTimer LampMenu Setup Switcher Control Help ContentsPC Card Files Source InformationLink Mode Test PatternSpecifications OpticalElectrical Vcci MechanicalUSA Oceania EN60950 AS/NZS3548 Class a AsiaCeiling Mount Kit Remote 3 XLR Pin Assignments and SignalsPin No Signal Ground XL CmkitCompatible Input Signal List SGIVesa Focus PowerLens Shift ZoomDimensions AppendixPreparation Recommend Tips on Adjusting Focus for Lens Memory FunctionAdjusting the Focus Warm up the projector for about 60 minutes7N8P0381

XT9000 specifications

The NEC XT9000 is a high-performance display solution designed for a wide range of applications, including corporate, educational, and retail environments. Known for its cutting-edge features and advanced technologies, the XT9000 series offers an exceptional viewing experience that enhances presentations, advertising, and information dissemination.

One of the standout characteristics of the NEC XT9000 is its impressive image quality. The display utilizes a high-resolution panel that provides crisp and vibrant visuals, making content more engaging and impactful. With a contrast ratio that excels in both brightly lit and dimly lit environments, the XT9000 ensures that images remain sharp and colors are accurately represented, contributing to a more immersive viewing experience.

The XT9000 series also incorporates advanced calibration technologies. With features such as automatic color calibration and ambient light sensors, the display intelligently adjusts its brightness and color settings based on the surrounding environment. This adaptability maximizes visibility and minimizes eye strain for viewers.

In terms of connectivity, the NEC XT9000 is equipped with a wide range of input options, including HDMI, DisplayPort, and legacy connectors. This versatility allows seamless integration with various devices, from laptops and media players to digital signage systems. Furthermore, the built-in content management system provides users with the ability to schedule and control media playback efficiently, making it ideal for digital signage applications.

The robust design of the XT9000 is another key feature. Engineered for durability, it can withstand the rigors of constant use in busy environments. It also includes a fanless design, which reduces noise and enhances reliability. The display's energy-efficient technology contributes to lower operational costs, making it a sustainable choice for businesses and organizations.

Moreover, the NEC XT9000 supports advanced display configurations, enabling users to create multi-screen setups with ease. This feature is particularly beneficial for large presentations or events requiring attention-grabbing visuals across multiple displays. The XT9000 series is also compatible with NEC's software solutions, allowing for streamlined control and monitoring of multiple display units.

Overall, the NEC XT9000 stands out as a versatile and powerful display solution, equipped with features that cater to the needs of modern businesses and institutions. With its high-quality visuals, smart technologies, and robust build, it is designed to meet the demands of various professional environments, making it a reliable choice for any display application.
Top Page Image Contents