Using the PC Card Viewer function

NOTE:

When using the supplied software (CD-ROM)

The software is designed to use with a personal computer only. Do not play the software on CD player. Doing so could cause damage to speakers.

Inserting the PC Card

•Hold the PC card horizontally and insert it slowly into card slot with its top facing up.

•The eject button pops out once the PC card is fully inserted. Check that the PC card is fully inserted.

NOTE: Do not try to force the PC card into the slot.

Features

The Viewer feature allows slides stored on a PC card to be displayed on the projector. Even if no computer is available, presentations can be conducted simply with the projector. This feature is convenient for holding presentations at meetings and in offices, as well as for playing images taken on digital cameras.

Easy to use

•Presentations can be started immediately simply by inserting a PC card (not supplied)

•Easy slide switching

•Remote control operation

•Jumping to list of slides or any specific slide

High quality images

•High resolution up to 1024×768 dots(MT840: up to 800×600 dots)

•24-bit full color playback

•Viewing of digital camera images

Simpl utility software (for computer)

•PC Card Viewer software operable on Windows 95/NT

•Slides can be created by capturing the currently displayed im- age

•Control screen for displaying lists of slides and editing

•Automatic slide conversion of files created with Microsoft PowerPoint 95 and 97

*Microsoft, Windows and PowerPoint are registered trademarks of Microsoft Corporation.

Inserting and Ejecting the PC Card

The PC card is used to view presentation data prepared on the com- puter and to capture and play images projected with the projector.

Ejecting the PC Card

Press the eject button. The PC card pops out a little. Grasp the edges of the PC card and pull it out. Do not eject the PC card while its data is being accessed.

Eject button

Direction for Inserting the PC Card

The PC card has a top and bottom and must be inserted into the PC card slot in a specific direction. It cannot be inserted back- wards or upside-down. Attempting to force it into the slot in the wrong direction may break the internal pin and damage the card slot. Refer to the PC card's operating instructions for the proper direction of insertion.

PC Card Type

The PC Card Access slot accepts PCMCIA Type II.

E–26