When the tool bar is not displayed:
Multi cursor (blue marks)
Folder | Folder | Folder | Folder |
Folder |
|
|
|
When the tool bar is not displayed, use the ◀ or ▶ button to advance to the next folder or return to the previous folder.
Folder
Slide(Table) cursor (yellow marks)
Slide | Slide | Slide | Slide |
|
|
|
|
Slide | Slide | Slide | Slide |
|
|
|
|
|
|
|
|
When the tool bar is not displayed, use the ◀ or ▶ button to advance to the next slide or return to the previous slide.
Slide
Auto Play Mode
•If the “Auto Play” option is selected in “PC Card Viewer Op- tions” of the menu, any given slide will start to play automati- cally. You can also specify Auto Play Interval between 5 and 300 seconds.
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected.
Example:
When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it is possible to switch from a PC Card Viewer slide to the video picture then back to the PC Card Viewer slide simply by using the Source button.
NOTE: Even if you switch the current PC Card Viewer source to another source, the current slide is retained. When you return back to the PC Card Viewer, you will get the slide that has been retained.
POWER
OFFON
COMPUTER PJ PROJECTOR
SOURCE | AUTO ADJ. |
SA
NOTE: The PC card editing operation cannot be performed from the projector. Do so using the PC Card Viewer software.
NOTE: To use the ◀ or ▶ button to advance to the next slide or folder, or return to the previous slide or folder, you must be in the Projector mode.
To be in the Projector mode, press the Computer/Projector Select button and the button lights in red.