NEC MultiSync MT840 user manual When using the PC Card Viewer function

When using the PC Card Viewer function

Condition	Status
No picture	• Is “PC Card Viewer” selected from the Source menu?
	• Is the PC memory card seated in the PC CARD ACCESS slot completely?
	• Are slide data stored in the PC card?
	• Have the contents of the PC card been destroyed?
Part of a slide is not displayed	• While an image with over 1024×768 dots is projected, several lines of information will be lost. Use the
	supplied software change the image to 1024×768 dots in size.
Contents of PC Card are	• Areas of slides exceeding 1024×768 (MT840: 800×600 dots) cannot be displayed. Use the PC Card
damaged	Viewer software, etc., to change the image size to 1024×768 dots (MT840: 800×600 dots).
	In addition, the displayable image size differs according to the resolution of the projector. Use the PC Card
	Viewer software, etc., to change the image size.
	Note that on MT840 JPEG images exceeding 800×600 dots are scaled down to three-quarters of its
	original size. Example: a JPEG image exceeding 1024×768 dots is displayed in 768 (=1024×3/4)×576
	(=768×3/4) dots.
	• Use a computer, etc., to repair the data.

For more information contact your dealer.

E–36