Important Information

Precautions:

Please read this manual carefully before using your NC1600C and keep the manual handy for future reference.

Important Safeguards

These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNITÅfS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS IN- SIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

CAUTION

•In order to reduce any interference with radio and television reception use a signal cable with ferrite core attached. Use of signal cables without a ferrite core attached may cause interference with radio and television reception.

•This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

DOC compliance Notice

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Machine Noise Information Regulation - 3. GPSGV,

The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.

Disposing of your used product [English]

EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.

This includes projectors and their electrical accessories or lamps. When you dispose of such products, please follow the guidance of your local authority and/or ask the shop where you purchased the product.

After collecting the used products, they are reused and recycled in a proper way. This effort will help us reduce the wastes as well as the negative impact to the human health and the environment at the minimum level.

The mark on the electrical and electronic products only applies to the current European Union Member States.

WARNING

Installation and transport

Consult your dealer for installing and transporting the projector. DO NOT install or transport the projector by non-professional person. Doing so may cause the lamp to break or may cause personal injury.

•Power Supply

-Consult your dealer for installing the power cable to the projector. DO NOT install the power cable by yourself. Doing so may cause a fire or electric shock.

-The projector is so designed that it operates with the power supply voltage described below.

• AC200-240V 50/60Hz

Ensure that your power supply fits this requirement before attempting to use your projector.

-Handle the power cable carefully. A damaged or frayed power cable can cause electric shock or fire.

•Do not use any power cables than the supplied one.

•Do not bend or tug the power cable excessively.

•Do not place the power cable under the projector, or any heavy object.

•Do not cover the power cable with other soft materials such as rugs.

•Do not heat the power cable

•Turn off the projector, unplug the power cable and contact qualified service personnel under the following conditions:

-When the power cable or plug is damaged or frayed.

-If liquid has been spilled into the projector, or if it has been exposed to rain or water.

-If the projector does not operate normally when you follow the instructions described in this user’s manual.

-If the projector has been dropped or the cabinet has been damaged.

-If the projector exhibits a distinct change in performance, indicating a need for service.

NC1600C specifications

The NEC NC1600C is a state-of-the-art DLP projector designed specifically for cinema applications, offering exceptional performance for both small and mid-sized theater environments. As part of NEC's commitment to delivering cutting-edge projection technology, the NC1600C presents a wealth of features tailored to meet the demands of modern cinema.

At the heart of the NC1600C is its DLP (Digital Light Processing) technology, which utilizes a Digital Micromirror Device (DMD) to create high-clarity images. This model boasts a native resolution of 2K (2048 x 1080 pixels), ensuring that audiences experience breathtaking visuals with sharpness and detail. The projector achieves impressive brightness levels, producing up to 16,000 lumens, which allows it to project vivid images even in well-lit conditions.

One of the standout features of the NEC NC1600C is its ability to handle a variety of content formats, including 2D and 3D cinema along with high frame rate (HFR) content. This versatility makes it suitable for a wide range of movie genres and viewing experiences, enhancing the cinematic quality. The NC1600C also supports DCI (Digital Cinema Initiatives) standards, ensuring compliance with industry requirements for digital cinema content.

Thermal management is crucial in high-performance projectors, and the NC1600C incorporates advanced cooling technology to ensure reliable operation during extended use. This design minimizes the risk of overheating, enhancing longevity and reducing maintenance costs. Additionally, the projector features a built-in automation system that adjusts lamp intensity, optimizing performance while maintaining exceptional image quality.

Another significant characteristic of the NC1600C is its integrated cinema server, allowing for straightforward content management and playback. The intuitive user interface simplifies operations for cinema staff, increasing efficiency and contributing to a seamless viewing experience.

Connectivity is paramount in modern projectors, and the NEC NC1600C is equipped with multiple input options, including HDMI, 3G SDI, and USB. This flexibility makes it easy to integrate with existing systems, accommodating various playback devices and formats.

In conclusion, the NEC NC1600C is a powerful and versatile digital cinema projector that combines innovative technology with high performance. Its advanced features, including 2K resolution, high brightness, robust cooling, and extensive connectivity, make it a preferred choice for cinema operators looking to deliver an outstanding cinematic experience. Whether for independent theaters or larger multiplex environments, the NC1600C stands as a reliable solution for high-quality film presentation.