NEC NC1600C user manual Operation using an Http browser, Overview, Preparation before use

Page 45

6. Appendix

6-4. Operation using an HTTP browser

6-4-1. Overview

The use of HTTP server functions will allow control of the projector from a web browser. Please be sure to use “ Microsoft Internet Explorer 4.x” or a higher version for the web browser.

This device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method will vary depending on the version of the browser. Please refer to the help files and the other information provided in your software.

NOTE

The display’s or button’s response can be slowed down or operation may not be accepted depending on the settings of your network.

Should this happen, consult your network administrator.

The projector may not respond if its buttons are repeatedly pressed in rapid intervals. Should this happen, wait a moment and repeat. If you still cannot get any response, pull out and then reinsert the LAN card on the projector.

Access is gained to the HTTP server functions by and specifying http://<the projector’s IP address>/index.html

in the entry column of the URL.

6-4-2. Preparation before use

Make network connections and set up the projector and confirm that it is complete before engaging in browser operations. Operations with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not be displayed depending on the effectiveness of the cache, and the contents set from a browser not be reflected in operation. It is recommended that a proxy server not be used unless it is unavoidable.

6-4-3. Handling of the address for operation via a browser

Regarding the actual address that is entered for the address or entered to the URL column when operation of the projector is via a browser, the host name can be used as it is with the host name corresponding to the IP address of the projector has been registered in the domain name server by a network administrator, or the host name corresponding to the IP address of the projector has been set in the “HOSTS” file of the computer being used.

(Example 1) When the host name of the projector has been set to “pj.nec.co.jp”

http://pj.nec.co.jp/index.html is specified for the address or the entry column of the URL to access HTTP server functions.

(Example 2) When the IP address of the projector is “192.168.10.10”

http://192.168.10.10/index.html is specified for the address or the entry column of the URL to access HTTP server functions.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents NC1600C Important Information Important Information Europe Table of Contents Equipped with easy to use functions FeaturesUp-to-date functions of DLP Cinema available DMD Face Dust Protection StructureTIP What’s in the Box?Front of the Projector Names of the Projector PartsRear of the projector Connection terminals Control panel To 8 buttons Cancel buttonCTL Lamp button Lamp +/- buttonsNames on the Remote Control Effective range of the remote control Back light switchButtons CTL buttonPccard USB Using the remote control cableStep Steps for setting up and connectingConnecting the image input terminals Connecting the various control terminal Steps of projecting images Projection of Images Basic OperationTurning your projector on Projection of Images Basic Operation Press the Menu CTL Down button Selecting the title of input signalAdjusting the position and the size of projected screen Adjusting the position of the projected screen Lens shiftDisplaying the test pattern Focusing the projected screen Focus Fine adjustment of the size of the projected screen ZoomTurning on/off the lamp with the projector turned on Turning off the lampTurning on the lamp Turning your projector off Turn off the AC power to the projector headScreen display Basic operation with adjustment menusWhen power is turned on When in standbyWhen the power is turned off Operating menusPress the Menu CTL UP button several times Example of Entry How to enter alphanumeric charactersTable of adjustment menus Title Select Title select Title MemoryTest Pattern Title Setup ConfigurationLamp Setup AdjustInformation LampMacro Key Usage Error CodeVersion SystemIP Address MMS StatusMMS Built-in Cleaning the Lens Cleaning the CabinetProblems and where to check TroubleshootingAppendix Power indicator Indicator display listStatus indicator MMS Status indicatorRear Status indicator Error code list Appendix Example 2 When the IP address of the projector is Operation using an Http browserOverview Preparation before useStructure of the Http server Outline Drawing 700990 360 503 USA SpecificationsPin Assignment and Functions of Terminal PC Control connector D-Sub 9 pinInternal Configuration Diagram of LAN Port Remote control input connector Remote in Stereo miniLAN port LAN-A, LAN-B RJ-45 PC card slotExternal control connector GPI/O D-Sub 37 pin Using Gpio Control Input ConnectorTiming chart of Gpio control Output Connector DVI-A, DVI-B DVI digital Input connector DVI-D 24 pin SDI-A, SDI-B HD-SDI input connector BNCRelated products list Ver.1 06/07

NC1600C specifications

The NEC NC1600C is a state-of-the-art DLP projector designed specifically for cinema applications, offering exceptional performance for both small and mid-sized theater environments. As part of NEC's commitment to delivering cutting-edge projection technology, the NC1600C presents a wealth of features tailored to meet the demands of modern cinema.

At the heart of the NC1600C is its DLP (Digital Light Processing) technology, which utilizes a Digital Micromirror Device (DMD) to create high-clarity images. This model boasts a native resolution of 2K (2048 x 1080 pixels), ensuring that audiences experience breathtaking visuals with sharpness and detail. The projector achieves impressive brightness levels, producing up to 16,000 lumens, which allows it to project vivid images even in well-lit conditions.

One of the standout features of the NEC NC1600C is its ability to handle a variety of content formats, including 2D and 3D cinema along with high frame rate (HFR) content. This versatility makes it suitable for a wide range of movie genres and viewing experiences, enhancing the cinematic quality. The NC1600C also supports DCI (Digital Cinema Initiatives) standards, ensuring compliance with industry requirements for digital cinema content.

Thermal management is crucial in high-performance projectors, and the NC1600C incorporates advanced cooling technology to ensure reliable operation during extended use. This design minimizes the risk of overheating, enhancing longevity and reducing maintenance costs. Additionally, the projector features a built-in automation system that adjusts lamp intensity, optimizing performance while maintaining exceptional image quality.

Another significant characteristic of the NC1600C is its integrated cinema server, allowing for straightforward content management and playback. The intuitive user interface simplifies operations for cinema staff, increasing efficiency and contributing to a seamless viewing experience.

Connectivity is paramount in modern projectors, and the NEC NC1600C is equipped with multiple input options, including HDMI, 3G SDI, and USB. This flexibility makes it easy to integrate with existing systems, accommodating various playback devices and formats.

In conclusion, the NEC NC1600C is a powerful and versatile digital cinema projector that combines innovative technology with high performance. Its advanced features, including 2K resolution, high brightness, robust cooling, and extensive connectivity, make it a preferred choice for cinema operators looking to deliver an outstanding cinematic experience. Whether for independent theaters or larger multiplex environments, the NC1600C stands as a reliable solution for high-quality film presentation.
Top Page Image Contents