NEC NC1600C user manual Troubleshooting, Problems and where to check

Page 39

6.

Appendix

6-1. Troubleshooting

Before asking for repair, please check your connection, settings and operation once again. If the trouble cannot be corrected,

please contact your dealer/distributor for instructions or repair.

6-1-1. Problems and where to check

Problem

Check these items

 

 

The projector cannot be turned on.

Check to see if the power plug is properly connected to the outlet.

 

 

 

Make certain that the main power switch is ON.

 

 

 

Check to see whether the panel key lock function is activated. If so, the main unit's control buttons

 

are locked and do not work, but the projector can be controlled using the remote control unit.

 

 

 

Is the temperature inside the projector too high? When the inside temperature is too high, the

 

protective function does not allow your projector to be turned on. Wait some time and then turn it on.

 

 

The image cannot be projected.

Check to see if the connected input has been selected.

 

 

 

Check to see if a cable is properly connected to the input terminal.

 

 

 

Check to see whether the douser is closed.

 

 

 

Check to see if the settings are all adjusted properly.

 

 

The image is distorted.

Check to see if the protractor is properly set up.

 

 

The image is blurred.

Make certain that the lens is properly focused.

 

 

 

Check to see if the screen and a projector are installed at correct angles.

 

 

 

The projection distance may be larger than the focusing range.

 

 

 

See if the lens and other parts have condensation on them. If the projector is turned on in a

 

warm place after storage in a cold place, the lens and other optical components inside may

 

develop condensation. In such a case, please wait several minutes until the comdensation

 

disappears.

 

 

Video image is disturbed

Check whether the signal cable connected to the projector is disconnected.

 

 

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents NC1600C Important Information Important Information Europe Table of Contents Equipped with easy to use functions FeaturesUp-to-date functions of DLP Cinema available DMD Face Dust Protection StructureTIP What’s in the Box?Front of the Projector Names of the Projector PartsRear of the projector Connection terminals Control panel Lamp +/- buttons Cancel buttonTo 8 buttons CTL Lamp buttonNames on the Remote Control CTL button Back light switchEffective range of the remote control ButtonsPccard USB Using the remote control cableStep Steps for setting up and connectingConnecting the image input terminals Connecting the various control terminal Steps of projecting images Projection of Images Basic OperationTurning your projector on Projection of Images Basic Operation Press the Menu CTL Down button Selecting the title of input signalAdjusting the position and the size of projected screen Adjusting the position of the projected screen Lens shiftDisplaying the test pattern Focusing the projected screen Focus Fine adjustment of the size of the projected screen ZoomTurning on/off the lamp with the projector turned on Turning off the lampTurning on the lamp Turning your projector off Turn off the AC power to the projector headScreen display Basic operation with adjustment menusOperating menus When in standbyWhen power is turned on When the power is turned offPress the Menu CTL UP button several times Example of Entry How to enter alphanumeric charactersTable of adjustment menus Title Select Title select Title MemoryTest Pattern Adjust ConfigurationTitle Setup Lamp SetupInformation LampMacro Key System Error CodeUsage VersionIP Address MMS StatusMMS Built-in Cleaning the Lens Cleaning the CabinetProblems and where to check TroubleshootingAppendix MMS Status indicator Indicator display listPower indicator Status indicatorRear Status indicator Error code list Appendix Preparation before use Operation using an Http browserExample 2 When the IP address of the projector is OverviewStructure of the Http server Outline Drawing 700990 360 503 USA SpecificationsPin Assignment and Functions of Terminal PC Control connector D-Sub 9 pinPC card slot Remote control input connector Remote in Stereo miniInternal Configuration Diagram of LAN Port LAN port LAN-A, LAN-B RJ-45External control connector GPI/O D-Sub 37 pin Using Gpio Control Input ConnectorTiming chart of Gpio control Output Connector DVI-A, DVI-B DVI digital Input connector DVI-D 24 pin SDI-A, SDI-B HD-SDI input connector BNCRelated products list Ver.1 06/07

NC1600C specifications

The NEC NC1600C is a state-of-the-art DLP projector designed specifically for cinema applications, offering exceptional performance for both small and mid-sized theater environments. As part of NEC's commitment to delivering cutting-edge projection technology, the NC1600C presents a wealth of features tailored to meet the demands of modern cinema.

At the heart of the NC1600C is its DLP (Digital Light Processing) technology, which utilizes a Digital Micromirror Device (DMD) to create high-clarity images. This model boasts a native resolution of 2K (2048 x 1080 pixels), ensuring that audiences experience breathtaking visuals with sharpness and detail. The projector achieves impressive brightness levels, producing up to 16,000 lumens, which allows it to project vivid images even in well-lit conditions.

One of the standout features of the NEC NC1600C is its ability to handle a variety of content formats, including 2D and 3D cinema along with high frame rate (HFR) content. This versatility makes it suitable for a wide range of movie genres and viewing experiences, enhancing the cinematic quality. The NC1600C also supports DCI (Digital Cinema Initiatives) standards, ensuring compliance with industry requirements for digital cinema content.

Thermal management is crucial in high-performance projectors, and the NC1600C incorporates advanced cooling technology to ensure reliable operation during extended use. This design minimizes the risk of overheating, enhancing longevity and reducing maintenance costs. Additionally, the projector features a built-in automation system that adjusts lamp intensity, optimizing performance while maintaining exceptional image quality.

Another significant characteristic of the NC1600C is its integrated cinema server, allowing for straightforward content management and playback. The intuitive user interface simplifies operations for cinema staff, increasing efficiency and contributing to a seamless viewing experience.

Connectivity is paramount in modern projectors, and the NEC NC1600C is equipped with multiple input options, including HDMI, 3G SDI, and USB. This flexibility makes it easy to integrate with existing systems, accommodating various playback devices and formats.

In conclusion, the NEC NC1600C is a powerful and versatile digital cinema projector that combines innovative technology with high performance. Its advanced features, including 2K resolution, high brightness, robust cooling, and extensive connectivity, make it a preferred choice for cinema operators looking to deliver an outstanding cinematic experience. Whether for independent theaters or larger multiplex environments, the NC1600C stands as a reliable solution for high-quality film presentation.
Top Page Image Contents