NEC manual Specifications, Model Number VT660K/VT460K/VT560 Optical

Page 34

SPECIFICATIONS

This section provides technical information about the VT660K/VT460K/VT560 Projector's performance.

Model Number

VT660K/VT460K/VT560

Optical

 

LCD Panel

VT660K: 0.7" p-Si TFT active-matrix with Micro Lens Array

 

VT460K/VT560: 0.7" p-Si TFT active-matrix

Resolution

VT660K/VT560: 1024×768 pixels* native, up to UXGA with Advanced AccuBlend

 

VT460K: 800×600 pixels* native, up to UXGA with Advanced AccuBlend

Lens

Manual zoom and focus:

 

F1.7 - 2.0 f=21.6 - 25.9mm

Lamp

VT660K/VT460K: 205W (164W Eco mode)

 

VT560: 200W (160W Eco mode)

Image Size

21 - 300 inches (0.5 - 7.6 m) diagonal

Projection Distance

2.38 - 35.8 ft / 0.7 (Tele) - 10.9 m (Tele)

Projection Angle

Tele : 9.5° - 10.0° Wide : 11.3° - 11.8°

Keystone Correction

+/- 30 degrees electronic (auto)

Electrical

 

Inputs

1 RGB/Component (D-Sub 15 Pin), 1 S-Video (DIN 4 Pin), 1 Video (RCA),

 

1 Stereo Mini Audio, 2 (L/R) RCA Audio, 1 PC Control (DIN 8 Pin)

Outputs

1 RGB (D-Sub 15 Pin), 1 Stereo Mini Audio

USB Port

1 B Type

Video Compatibility

NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV: 1080i, 1080i/50Hz, 720p, 576p, 480p, 480i/

 

60Hz

Scan Rate

Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 50 Hz to 120 Hz

Video Bandwidth

RGB: 80 MHz (-3dB)

Color Reproduction

16.7 million colors simultaneously, Full color

Horizontal Resolution

NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 550 TV lines

 

SECAM: 350 TV lines

 

YCbCr: 800 TV lines

 

RGB: VT660K/VT560 / 1024 dots (H)×768 dots (V), VT460K / 800 dots (H)×600 dots (V)

External Control

RS232, IR

Sync Compatibility

Separate Sync / Composite Sync / Sync on G

Built-in Speaker

1W (monaural)

Power Requirement

100 - 120V AC / 200 - 240V AC, 50 / 60 Hz

Input Current

VT660K/VT460K: 3.1A (100 - 120V AC) / 1.5A (200 - 240V AC)

 

VT560: 2.9A (100 - 120V AC) / 1.4A (200 - 240V AC)

Power Consumption

VT660K/VT460K: 7.5W in Standby mode / 270 W in Lamp Normal mode / 220 W in Lamp Eco mode

 

VT560: 7.5W in Standby mode / 260 W in Lamp Normal mode / 220 W in Lamp Eco mode

Mechanical

 

Installation Orientation

Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear

Dimensions

12.2" (W)×3.5" (H)×9.1" (D)

 

310mm (W)×89mm (H)×230mm (D)

 

(not including protrusions)

Net Weight

6.5 lbs / 2.9 kg

Environmental Considerations

Operational Temperatures : 32° to 95°F (0° to 35°C), 20% to 80% humidity (non-condensing)

 

Storage Temperatures : 14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)

Regulations

UL Approved (UL 60950, CSA 60950)

 

Meets DOC Canada Class B requirements

 

Meets FCC Class B requirements

 

Meets AS/NZS3548 Class B

 

Meets EMC Directive (EN55022:1998, EN55024-1998, EN61000-3-2, EN61000-3-3)

 

Meets Low Voltage Directive (EN60950, TUV GS Approved)

For additional information visit:

US : http://www.necvisualsystems.com

Europe : http://www.nec-europe.com/

Global : http://www.nec-pj.com/

*Effective pixels are more than 99.99%.

The specifications are subject to change without notice.

E-34

Image 34
Contents VT660K/VT460K VT560 Safety Cautions Lamp Replacement Fire and Shock PrecautionsWhats in the Box? Table of Contents Introduction Features youll enjoyIntroduction to the Projector Part Names of the Projector Attaching the supplied carrying handleTop Features Terminal Panel Features Part Names of the Remote Control Battery Installation Remote Control PrecautionsSetting Up the Screen and the Projector Installation and ConnectionsSelecting a Location Throw Distance and Screen Size Distance ChartDo not attempt to install the projector yourself Reflecting the ImageConnecting Your PC or Macintosh Computer Making ConnectionsConnecting an External Monitor To connect Scart output RGBConnecting Your DVD Player RGBConnecting Your VCR or Laser Disc Player Connecting the Supplied Power CableProjecting AN Image Basic Operation Turning on the ProjectorSelecting a Source Adjusting the Picture Size and PositionAdjust the Tilt Foot Selecting the computer or video sourceManual Keystone Correction Correcting the Vertical Keystone DistortionAuto Keystone Correction FocusAdjusting the Image Using Auto Adjust Turning Up or Down VolumeTo turn off the projector Convenient Features Using the Remote Mouse FunctionEnlarging and Moving a Picture Turning off the Image and SoundFreezing a Picture Getting the InformationUsing the Menus Using ON-SCREEN MenuBasic Menu Operation List of Menu Items Indicates the Control Panel Key Lock is enabled Menu ElementsPicture Menu Descriptions & FunctionsImage Setup AdvancedSelecting Signal Format Signal Select To disable the Security functionEnabling High Speed Fan Mode High Speed Fan Mode Page2 Enabling Power Management Power ManagementDefault InformationReplacing the Lamp MaintenanceTo replace the lamp Cleaning the Cabinet and the Lens CleaningCleaning or Replacing the Filter To replace the filter spongeStatus Indicator TroubleshootingPower Indicator Lamp IndicatorCommon Problems & Solutions Check These Items Does not turn onSpecifications Model Number VT660K/VT460K/VT560 OpticalMini D-Sub 15 Pin Connector Cabinet DimensionsPin Assignments of D-Sub RGB Input Connector Pin No RGB Signal Analog YCbCr SignalCompatible Input Signal List SXGA+PC Control Codes Cable Connection Communication ProtocolTerm of warranty TravelCare a service for international travelersServices offered with TravelCare TravelCare GuideService are offered Asia and Middle EastApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

VT460K, VT560, VT660K specifications

The NEC VT460K, VT560, and VT660K are part of a renowned line of projectors that stand out for their reliability, performance, and versatility, designed primarily for educational and business environments. Each model offers unique features tailored to meet the diverse needs of users while maintaining high standards of image quality and ease of use.

Starting with the NEC VT460K, this model is characterized by its exceptional portability and lightweight design, making it an ideal choice for on-the-go presentations. It boasts a brightness of 5000 lumens and a native resolution of XGA (1024x768), ensuring clear and vibrant images even in brightly lit rooms. Its lamp life is impressive, with Eco mode extending usage to a remarkable 10,000 hours, minimizing maintenance costs. The VT460K also features a variety of connectivity options, including HDMI and VGA ports, allowing for seamless integration with various devices.

The VT560 offers a step up in terms of resolution and brightness. With a native resolution of WXGA (1280x800) and 5500 lumens of brightness, it is designed for slightly larger venues where image clarity is paramount. The addition of advanced image processing technologies enhances color accuracy and contrast, providing an immersive viewing experience. The VT560 also emphasizes user-friendly features, such as a straightforward menu system and an intuitive remote control, making it accessible for all users, regardless of technical expertise.

Lastly, the VT660K takes performance to the next level with full HD resolution of 1920x1080 and an output of 6000 lumens. This model is particularly suited for high-definition content and large-screen applications, making it ideal for conferences and seminars. The VT660K is equipped with advanced lens shift and zoom capabilities, providing flexibility in installation and setup. Furthermore, it incorporates enhanced networking features, allowing for wireless presentations and remote management, catering to modern business needs.

All three models prioritize energy efficiency and environmental sustainability, with features like eco-friendly modes and low energy consumption. Their robust build quality ensures longevity and consistent performance, confirming NEC’s commitment to producing reliable projection solutions. Whether for classrooms, meeting rooms, or larger auditoriums, the VT460K, VT560, and VT660K deliver outstanding performance and versatility tailored to various presentation needs.