Top Features
1
|
|
| SOURCE |
| 5 |
| 4 |
|
|
| |
|
|
| M |
|
|
| E |
7 |
|
| N |
|
| U | |
| E |
| SELECT |
STATUS | N |
|
|
T |
|
| |
POWER | E |
|
|
R |
|
| |
|
|
| |
|
| C |
|
|
| A | |
|
|
| NCE L |
|
|
| 3 |
| ON |
|
|
| / |
|
|
| STAND | BY | 6 |
|
| ||
|
|
| |
8
9
2
AUTO | ADJUST |
|
1 Source Button
Use this button to select a video source such as a PC, VCR or DVD player.
2 Auto Adjust Button
Use this button to adjust
3 Menu Button
Displays the menu.
4 Select (▲▼ ) / Volume (+) (–) Buttons
▲▼ : Use these buttons to select the menu of the item you wish to adjust.
: Use these buttons to change the level of a selected menu item.
A press of the button executes the selection. When no menus appear, these ▲▼ buttons work as a volume control.
When the pointer is displayed, these ▲▼ buttons move the pointer.
6 Cancel Button
Press this button to exit the menu. Press this button to return the adjustments to the last condition while you are in the adjustment or setting menu.
7 Status Indicator
When this is lit red (orange in Eco mode) continually, it’s warning you that the projection lamp has exceeded 2000 hours (up to 3000 hours in Eco mode) of service. After this light appears, it is advis- able to replace the projection lamp as soon as possible. (See page
If this light blinks red rapidly, it indicates that the lamp cover or filter cover is not attached properly or the projector is overheated. See the Power / Status Light Messages on page
8 Power Indicator ( )
When this indicator is green, the projector is on; when the indica- tor is orange, it is in standby mode.
5 Enter Button | 9 Power Button (ON / STAND BY) |
Executes your menu selection and activates items selected from the menu.
Use this button to turn the power on and off when the power is supplied and the projector is in standby mode.
NOTE: To turn off the projector, press and hold this button for minimum of two seconds.