NEC VT540, VT440 user manual Using the Menus

Using the Menus

NOTE: An interlaced motion video image may be blurred while the menu is displayed.

1.Press the “Menu” button on the remote control or the projector cabinet to display the Main Menu.

2.Press the ▲▼ buttons on the remote control or the projector cabi- net to highlight the menu for the item you want to adjust or set.

3.Press the  button or the “Enter” button on the remote control or the projector cabinet to select a submenu or item.

4.Adjust the level or turn the selected item on or off by using “Se- lect”  or  buttons on the remote control or the projector cabi- net. The on-screen slide bar will show you the amount of increase or decrease.

5.The change is stored until you adjust it again.

ENTER: Stores the setting or adjustments.

CANCEL: Return to the previous screen without storing settings or adjustments.

6.Repeat steps 2-5 to adjust an additional item, or press “Cancel” on the remote control or the projector cabinet to quit the menu display.

E–25