NEC VT440, VT540 Menu Descriptions & Functions, Source Select, Picture, Volume, Image Options

Page 29

Menu Descriptions & Functions

Source Select

Enables you to select a video source such as a VCR, DVD player, laser disc player, computer or document camera depending on what is connected to your inputs. Press the “Select” button on the projec- tor cabinet or ▲▼ buttons on your remote control to highlight the menu for the item you want to adjust.

RGB

Selects the computer connected to your RGB or component signal.

NOTE: An optional component cable (Component V cable) is needed for a component signal.

Video

Selects what is connected to your Video input-VCR, laser disc player, DVD player or document camera.

S-Video

Selects what is connected to your S-Video input-VCR, DVD player, or laser disc player.

NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or S-Video source.

Picture

Provides access to controls for your image. Use the “Select” button on the projector cabinet or the remote control to highlight the menu for the item you want to adjust.

Brightness

Adjusts the brightness level or the back raster intensity.

Contrast

Adjusts the intensity of the image according to the incoming signal.

Color

Increases or decreases the color saturation level (not valid for RGB).

Hue

Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjustment is only valid for Video and Component inputs (Not RGB).

Sharpness

Controls the detail of the image for Video (Not for RGB and Compo- nent).

Volume

Adjusts the sound level of the projector.

NOTE:You can display the volume bar without opening the menu.See "Volume Bar (Direct Button)"on page E-31 for more details.

Image Options

Basic Mode

Advanced Mode

Provides optional controls such as Keystone Correction, Color Tem- perature and Lamp Mode. When you select Advanced Mode, the fol- lowing options are available: Gamma Correction, Aspect Ratio, Noise Reduction, Color Matrix, White Balance, Auto Adjust, Position/Clock, Resolution, and Factory Default.

Keystone

This feature corrects the keystone (trapezoidal) distortion to make the top of the screen longer or shorter to be the same as the bottom. Use the  or  buttons on the slide bar to correct the keystone (trapezoidal) distortion.

Keystone distortion

Normal

NOTE: The maximum keystone angle that can be corrected is 15 degrees upward and downward with the projector placed horizon- tally. However, a picture will be blurred if you correct the keystone angle beyond +12 degrees or more for SXGA signal on VT440.

Color Temperature

This feature adjusts the color temperature using the slide bar.

Move the slide bar to the right to increase the color temperature for a bluish image; to the left to decrease it for a reddish image.

E–28

Image 29
Contents MultiSync VT440/VT540 MultiSync VT440/VT540 LCD Projector User’s Manual Important Information PrecautionsInstallation Important SafeguardsPower Supply CleaningFire and Shock Precautions Lamp ReplacementTable of Contents Getting Started Features you’ll enjoyIntroduction Whats in the Box? ConnectQuick Guide ManualUsersCarrying the Projector Slot for Card Remote Control Rear/ Side FeaturesTop Features Terminal Panel Features Remote Control Precautions Remote Control FeaturesRemote Control Operating Range Setting up Your Projector InstallationUsing a Tabletop or Cart Adjusting the Tilt FootDistance Chart Distance ChartZoom Lens Wide Zoom Lens TeleReflecting the Image Ceiling InstallationMonitor Wiring DiagramSignal cable supplied Connecting Your PCIBM VGA or Compatibles Audio cableMacintosh Notebook type Connecting Your Macintosh ComputerMacintosh Desktop type To connect to a Macintosh, simplyExamples of DIP switch setting Settings for Monitor ModeExternal monitor Connecting an External MonitorDVD player Connecting Your DVD PlayerAudio Equipment Optional 15-pin-to-RCA3 cableVCR/ Laser disc player Connecting Your VCR or Laser Disc PlayerAudio equipment Document cameraEnlarging and Moving a Picture OperationGeneral Controls Using the Menus Items Menu TreeBasic/ Advanced Menu Sub Menu Menu Elements Menu Descriptions & Functions VolumeSource Select PictureAdvanced Options Advanced mode Lamp ModeGamma Correction Advanced mode White Balance Factory Default Advanced modeMenu SetupInformation ContentsHelp To replace the lamp MaintenanceReplacing the Lamp Cleaning or Replacing the Filters Remote Control Battery InstallationPower/ Status Light Messages TroubleshootingCommon Problems & Solutions Problem Check These ItemsMechanical SpecificationsElectrical VT440 / VT540 Cabinet DimensionsSub Pin Assignments Mini D-Sub 15 Pin ConnectorPin No RGB Signal Analog YCbCr Signal Timing Chart PC Control Codes PC Control Connector DIN-8PCable Connection Communication Protocol7841139