NEC LT150/LT85 user manual Remote Control Features, Supplied Remote Control

Remote Control Features

1. Infrared Transmitter

Direct the remote control toward the remote sensor on the projec- tor cabinet.

2. Auto Adjust Button (RGB only)

Press this to automatically adjust the vertical/horizontal position, clock frequency/phase and resolution if the projected picture is not centered, if there are vertical stripes on the picture or if the picture is flickering.

3. Select (▲▼ ) / Volume (+) (–) Buttons

▲▼: Use these buttons to select the menu of the item you wish to adjust.

When no menus appear, these buttons work as a volume control.

:Use these buttons to change the level of a selected menu

item.

A press of the button executes the selection.

When the menus or the Viewer tool bar is not displayed, these buttons can be used to select a slide, or to move the

cursor in Folder List or Slide List.
When the pointer is displayed, these ▲▼	buttons move
the pointer.

4. Cancel Button

Press this button to exit "Menus". Press this button to return to the previous menu without storing the current settings or adjustments when you are in the submenu or adjustment screen.

5. Picture Mute Button

This button turns off an image and sound for a short period of time. Press again to restore the image and sound.

NOTE: When the menu is displayed, a press of this button mutes an image and sound without turning off the menu.

6. Power Button

If the power is applied and the projector is in standby mode, you can use this button to turn your projector on and off.

NOTE: To turn off the projector, press and hold the POWER button for a minimum of two seconds.

7. Help Button

Provides information about operation and adjustment procedures or the set information for the current menu or adjustment during menu operation.

8. Pointer Button

Press this button to display one of the eight pointers; press again to hide the pointer. You can move your pointer icon to the area you want on the screen using the Select button.

Supplied Remote Control

							1
12	SOURCE			AUTO			2
				ADJ.
		U
11		N
	M	E
			Vol.
10			SELECT				3
	N		Vol.				L
	E				C	E
	T						4
		R		C
		E		N
				A
			POINTER	PIC.			5
9				MUTE
	MAGNIFY
			HELP	POWER			6

8

RD-366E

7

9. Magnify Button (+) (–)

Use the (+) or (–) button to adjust the image size up to 400%. When the pointer is displayed, the image is magnified about the pointer as its center. When the pointer is not displayed, the image is magnified about the screen center as its center.

When the image is magnified, the pointer is changed to the magni- fying icon.

10. Enter Button

Press this button to execute the selected item. When this is pressed, the adjustments and settings are saved, and the display is returned to the menu.

11. Menu Button

Displays the menu for various settings and adjustments.

12. Source Button

Press this button to select a video source such as a PC, VCR, DVD player or PC Card Viewer (CompactFlash card).

Each time this button is pressed, the input source will change as follows:

→RGB → Video → S-Video → PC Card Viewer 

If no input signal is present, the input will be skipped.

E–12