NEC 2000 IPS manual Forced Account Code, Authorization Code, Voice FIRST/TONE First

Page 22

FORCED ACCOUNT CODE

•Lift handset or press Speaker key, receive dial tone.

•Enter feature access code, receive service set tone.

•Enter Forced Account Code (up to 10 digits), receive dial tone.

AUTHORIZATION CODE

To Enter Without Account Code:

•Lift handset or press Speaker key, receive dial tone.

•Enter feature access code, receive service set tone.

•Enter Authorization Code (up to 10 digits).

•Receive dial tone, dial desired number.

VOICE FIRST/TONE FIRST

•Allows incoming station calls to your Dterm to either ring or go to voice announcement.

•Press Speaker key. Receive dial tone.

•Dial Voice/Tone access code, LED display shows current mode receives feature dial tone.

•Press *, LED display shows mode change, receive feature set tone.

NOTE: Each time * is pressed, you alternate between TONE and VOICE.

-20-

Image 22

Contents Dterm Series DTR-16LD-1 BK TEL Table of Contents Page Page Page Keys and Lamps Recall FeatureSpeaker/Receiver Volume MessageDND Do Not Disturb Ringer VolumeCB Call Back FD-A Call Forwarding- All CallsFD-N Call Forwarding- No Answer FD-DC Call Forwarding- Destination CancelFD-B Call Forwarding- Busy FD-DS Call Forwarding- Destination SetExit HeadsetHelp Ohroff Off Hook Ringing OffTo Use Soft Keys Call Indicator Lamp MIC Microphone LampLCD Detail of Line Keys for Dterm Series I 16LD Terminal Setup with the Feature KEY Microphone On/OffTo adjust ringer tone Dterm IP Login Operation Dterm IP Logout OperationTo Originate AN Internal Call To Originate AN Outside Call VIA Extension Line KEYTo Originate a Call VIA Dynamic Dial PAD To originate Outside Line Appearance Automatic Idle Return To AnswerTo program To Originate a Call Using ONE-TOUCH ButtonsTo verify Account Code To Originate a Call Using Speed Calling INDIVIDUAL/GROUPTo Enter Account Code After Authorization Code To EnterVoice FIRST/TONE First Authorization CodeForced Account Code To Enter Without Account CodeAutomatic Intercom Originating a Voice CallTo Answer a Voice Call Hands Free To initiateManual Intercom Dial by Name Using System Speed Dialing Dial IntercomDial by Name Using Station Speed Dialing To Transfer a Call To Save a Name & Number to Station Speed DialingTo register name & number To retrieve To Place a Call on HoldIf unanswered To Place a Call on Exclusive Hold To retrieve at destination To Place a Call on Remote HoldTo retrieve from phone without destination line appearance Conference OptionTo Establish a Broker Call Call Back StationTo Answer a CAMPED-ON Call To SET CAMP-ON Transfer MethodTo activate call waiting Station CAMP-ON Call Waiting MethodTo answer call waiting Station To park a call from terminal without LCD Call Park SystemTo Park a Call From Terminal With LCD To retrieve a parked callCall Pickup Group When station within pickup group ringsCall Pickup Direct Timed Queuing Outside Line only If outside line is busyIf called station is busy Executive OverrideLast Number Redial To recall the last number dialedCID Call Back Call Redirect CID Call DisplayTo Set To cancelCall FORWARDING-ALL Calls To verify with 16 or 32-button DisplayCall FORWARDING-BUSY To verify with Display PhoneCall FORWARDING-NO Answer To Save and Repeat a Number Call Forwarding DestinationTo save To repeat Internal Zone Paging with MEET-METo page Station a Secretary BOSS/SECRETARY CallingTo answer Station B If boss accepts callBOSS/SECRETARY Override BossDo not Disturb Timed Reminder Privacy Release Return Message ScheduleDial Message Inback Hhmm Outback Awayback Mmdd VacationName Display Press Speaker key For example, to enter Paul Whisper System Clock Setup by Station Dialing DAY/NIGHT Mode Change by Station DialingQuick Reference Guide Answer Set Cancel Group Entry Cancel Part Number goes here

Related manuals

Manual 389 pages 12.68 Kb