NEC 2000 IPS manual Name Display

Page 52

NAME DISPLAY

NOTE: Display Dterm

A name with up to 16 characters can be entered to display the name on other Dterm telephones when making a call.

•Press Speaker key, Receive dial tone.

•Dial the Name Assignment access code and receive special dial tone.

•Using the keypad, depress the key with the desired letter to display the first letter on the key. The

display will indicate the numerical designation. Subsequent depressions will advance through the letters on that key. The Dial Pad Key TABLE can be used as a guide to indicate the key and

the number of depressions required to display numbers, letters, spaces and periods.

•When the desired letter is displayed, depression of the Transfer key will change the letter to a lower case letter (default is upper case). Depress the Hold key to enter that letter and advance to the next entry.

•Repeat the previous two steps until the desired name is displayed and entered.

-50-

Image 52

Contents Dterm Series DTR-16LD-1 BK TEL Table of Contents Page Page Page Keys and Lamps Feature Speaker/Receiver VolumeRecall MessageRinger Volume CB Call BackDND Do Not Disturb FD-A Call Forwarding- All CallsFD-DC Call Forwarding- Destination Cancel FD-B Call Forwarding- BusyFD-N Call Forwarding- No Answer FD-DS Call Forwarding- Destination SetHeadset HelpExit Ohroff Off Hook Ringing OffTo Use Soft Keys Call Indicator Lamp MIC Microphone LampLCD Detail of Line Keys for Dterm Series I 16LD Terminal Setup with the Feature KEY Microphone On/OffTo adjust ringer tone Dterm IP Login Operation Dterm IP Logout OperationTo Originate AN Internal Call To Originate AN Outside Call VIA Extension Line KEYTo Originate a Call VIA Dynamic Dial PAD Outside Line Appearance Automatic Idle ReturnTo originate To AnswerTo program To Originate a Call Using ONE-TOUCH ButtonsTo verify To Originate a Call Using Speed Calling INDIVIDUAL/GROUP To Enter Account Code After Authorization CodeAccount Code To EnterAuthorization Code Forced Account CodeVoice FIRST/TONE First To Enter Without Account CodeOriginating a Voice Call To Answer a Voice Call Hands FreeAutomatic Intercom To initiateManual Intercom Dial by Name Using System Speed Dialing Dial IntercomDial by Name Using Station Speed Dialing To Transfer a Call To Save a Name & Number to Station Speed DialingTo register name & number To retrieve To Place a Call on HoldIf unanswered To Place a Call on Exclusive Hold To retrieve at destination To Place a Call on Remote HoldTo retrieve from phone without destination line appearance Conference OptionTo Establish a Broker Call Call Back StationTo Answer a CAMPED-ON Call To SET CAMP-ON Transfer MethodTo activate call waiting Station CAMP-ON Call Waiting MethodTo answer call waiting Station Call Park System To Park a Call From Terminal With LCDTo park a call from terminal without LCD To retrieve a parked callCall Pickup Group When station within pickup group ringsCall Pickup Direct Timed Queuing Outside Line only If outside line is busyExecutive Override Last Number RedialIf called station is busy To recall the last number dialedCID Call Back Call Redirect CID Call DisplayTo cancel Call FORWARDING-ALL CallsTo Set To verify with 16 or 32-button DisplayCall FORWARDING-BUSY To verify with Display PhoneCall FORWARDING-NO Answer To Save and Repeat a Number Call Forwarding DestinationTo save To repeat Internal Zone Paging with MEET-METo page Station a BOSS/SECRETARY Calling To answer Station BSecretary If boss accepts callBOSS/SECRETARY Override BossDo not Disturb Timed Reminder Privacy Release Return Message ScheduleDial Message Inback Hhmm Outback Awayback Mmdd VacationName Display Press Speaker key For example, to enter Paul Whisper System Clock Setup by Station Dialing DAY/NIGHT Mode Change by Station DialingQuick Reference Guide Answer Set Cancel Group Entry Cancel Part Number goes here

Related manuals

Manual 389 pages 12.68 Kb