Epson PS-1216U user manual 3 TCP/IP

Page 41

7.3.3TCP/IP

This page lists all TCP/IP settings of the Combo Print Server.

Use DHCP/BOOTP: If the Combo Print Server enables to obtain IP Address from DCHP Server, it will show “On”. Otherwise, it will show “Off”.

IP Address: Display the IP Address of the Combo Print Server. By default, the IP Address is “192.168.2.2”.

Subnet Mask: Display the subnet mask setting of the Combo Print Server. By default, the subnet mask is “255.255.255.0”.

Gateway: Display the gateway setting of the Combo Print Server. By default, the gateway setting is “0.0.0.0”.

37

Image 41
Contents Version 1.1 November User’s ManualCopyright FCC Compliance Statement Contents Introduction Product Package Combo Print Server Getting Started Hardware Installation ProcedureSoftware Installation Procedure Page Page Page Page Page IP Address Subnet Mask Page Page 1 GDI/Host-based Printer Page Page Page Page 1.1 Using GDI Printer Page Print Server Utilities Setup Wizard Introduction Server ConfigurationSearch for All Available Combo Print Server Status of Combo Print Server Setup the Combo Print Server General Configuration TCP/IP Configuration IP Address Assignment System Configuration Web Management Login System Device SetupPage Printer 3 TCP/IP Setup Wizard Advanced Settings 2 TCP/IP Save Settings System Tools Load DefaultUpgrade Firmware from Browser Troubleshooting Page Page GDI Printers Appendix Combo Print Server Compatibility List