![](/images/new-backgrounds/1145314/14531461x1.webp)
IMAGE Menu
IMAGE![](/images/new-backgrounds/1145314/14531461xi2.webp)
Menu
From the IMAGE Menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Item
Description
| Using the ▲/▼ buttons switches the mode for aspect ratio. |
| For a computer signal |
| NORMAL ó 4:3 ó 16:9 |
ASPECT | For a Video signal, |
| 4:3 ó 16:9 ó 14:9 |
| For no signal |
| 4:3 (fixed) |
| • The NORMAL mode keeps the original aspect ratio of the signal. |
| Using the ▲/▼ buttons adjusts the |
| Large (It reduces picture) ó Small (It magnifies picture) |
OVER SCAN | • This item can be selected only for a video, |
| video signal. |
| • When this adjustment is too large, certain degradation may appear |
| at the frame area of the picture. In such a case, please adjust small. |
| Using the ▲/▼ buttons adjusts the vertical position. |
| Up ó Down |
| • |
| on the screen. If this occurs please reset the vertical position to the |
V POSITION | default setting. |
Pressing RESET button when V POSITION is selected will reset V | |
| POSITION to the default setting. |
| • When this function is performed on a video signal, |
| or component video signal, the range of this adjustment depends |
| on OVER SCAN (above) setting. It is not possible to adjust when |
| OVER SCAN is set to 10. |
(continued on next page)
31