Epson 8100 user manual Projector, Name, Enter or Input button

Item

Description

(1) Use the▲/▼ buttons on the NETWORK Menu to select the

PROJECTOR NAME menu and press the ► button. The

PROJECTOR NAME dialog will be displayed.

(2) The current PROJECTOR NAME

will be displayed on the first 3 lines.

If not yet written, the lines will be

blank.

Use the ▲/▼/◄/► buttons and

the ENTER or INPUT button to

select and enter characters. The

RESET button can be used to

erase 1 character at a time. Also if

you move the cursor to DELETE or

ALL CLEAR on screen and push

the ENTER or INPUT button, 1

character or all characters will be

erased.

PROJECTOR

The PROJECTOR NAME can be

input up to 64 characters.

NAME

(3) To change an already inserted

character, press the ▲/▼ button to

move the cursor to one of the first 3

lines, and use the ◄/► buttons to

move the cursor on the character

to be changed. After pressing

the ENTER or INPUT button, the

character is selected. Then, follow

the same procedure as described at

the item (2) above.

(4) To finish entering text, move the

cursor to the SAVE on screen

and press the ENTER or INPUT

button. To revert to the previous

PROJECTOR NAME without saving

changes, move the cursor to the

CANCEL on screen and press the

ENTER or INPUT button.