![](/images/new-backgrounds/1145314/14531485x1.webp)
OPTION Menu
OPTION Menu (continued)
Item
Description
Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off.
Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
AUTO OFF | When the time is set to 0, the projector is not turned off automatically. | |
When the time is set to 1 to 99, and when the passed time with no- | ||
| ||
| signal or an unsuitable signal reaches at the set time, the projector | |
| lamp will be turned off. | |
| If one of the projector's buttons or the remote control buttons | |
| is pressed or one of the commands (except get commands) is | |
| transmitted to the CONTROL port during the corresponding time, | |
| projector will not be turned off. | |
| Please refer to the section “Turning off the power” (17). | |
| The lamp time is the usage time of the lamp, counted after the last | |
| resetting. It is shown in the OPTION Menu. | |
| Pressing RESET button or the ► button displays a dialog. | |
LAMP TIME | To reset the lamp time, select RESET using the ▲ button. | |
RESET ï CANCEL |
•Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.
•For the lamp replacement, see the section "Replacing the lamp"
(61).
| The filter time is the usage time of the |
| last resetting. It is shown in the OPTION Menu. |
| Pressing the RESET button or the ► button displays a dialog. |
FILTER TIME | To reset the filter time, select the RESET using the ▲ button. |
RESET ï CANCEL | |
| • Please reset the filter time only when you have cleaned or replaced |
| the |
| • For the |
| (63). |
(continued on next page)
43