Introduction and General Information
Features
Your complete
Other features include:
Lets you use the Home Cinema Audio System for a movie- theatre surround sound experience.
Additional Component Connections
Lets you connect other audio and audio/visual components to the DVD system so you can use the system’s surround sound speakers.
Night Mode
Lets you compress the dynamic range, reducing the difference in loudness between different sounds in Dolby Digital mode.
Parental Control (Rating Level)
Lets you set a ratings level so that your children cannot watch a DVD that has a rating higher than you set.
Sleep Timer
Enables the system to switch to standby mode automatically at a preset time.
Progressive Scan (for LX3500D model only)
Provides a flicker free image with the highest effect on film based sources. It can double the vertical resolution of the picture to 525 lines every time the picture is refreshed. To enjoy the full quality potential offered by progressive scan feature, a progressive scan TV is required.
Discs for playback
Your DVD player is able to play :
–All
–All finalised audio CDR and audio CDRW discs
–All VCDs, Super VCDs and DVDs
–
Player zone
DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is the same zone as your player (refer to page 2).
Supplied accessories
–a remote control with two AA batteries
–an MW loop antenna and an FM wire antenna
–an audio and Pr/Cr Pb/Cb Y video cable for connection with the TV
–five satellite speakers, including five speaker cables
–an active subwoofer, including a connection cable and a power cable
–a power cable for connection with the main unit (for versions /21S and /21H)
–this instruction booklet
If any item is damaged or missing, contact your retailer or Philips.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).
Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Installation
●Place the player on a flat, hard, and stable surface.
●There must be sufficient room in front of the player for the drawer to open.
●In a cabinet, allows about 10cm (4 inches) of free space all around the player for adequate ventilation.
●Do not expose your player to extreme temperatures or humidity.
Maintenance
●When a disc becomes dirty, clean it with a
cleaning cloth. Wipe the disc from the centre out, in a straight line.
●Do not expose the player, batteries or
discs to humidity, rain, sand or excessive heat (caused by heating equipment or
direct sunlight). Always keep the disc tray closed to avoid dust on the lens.
●Do not use solvents such as benzene, thinner, commercially available cleaners, or
●The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the player in the warm environment until the moisture evaporates.
English
INTRODUCTION AND GENERAL INFORMATION 9
pg | 9 | 4/16/02, 11:20 AM |