Telex 1505 service manual Specifications

Page 13

7.

1505 Specifications

 

Operating Temperature Range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 60°C

Power Requirements: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 to 16 Vrms semi-regulated, 250 mA nominal 600 /10K Balanced Receive Line Input Level: . . . . -30 dBm to +10 dBm, adjustable 10 K /10 K

Unbalanced Receive Input Level: . . . . . 0.025 Vrms to 2.5 Vrms, adjustable 10 K /10K

Mic Input Sensitivity:. . . . . . . . . . . . . . . 0.010 Vrms to 1.0 Vrms, adjustable 10K /10K

Summing Input Level: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 dBm (0.776 Vrms) nominal

Receive Amplifier Distortion:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1% THD max.

Receive Frequency Response: . . . . . . . . . . . . . . . . . . . . . . . . +1/-2 dB, 100 Hz to 10 KHz

Compression Range: . . . . . . . . . . 30 dB increase in signal, output increases less than 3 dB

Summing Level: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 dBm (0.776 Vrms) nominal

Balanced Transmit Line Output Level: . . . . . . . . . . . . -15 dBm to +10 dBm, 600 Line

Transmit Amplifier Distortion: . . . . . . . . . . . . . . . . . . . . . . . . . 1% THD max. @ 0 dBm

Transmit Frequency Response: . . . . . . . . . . . . . . . . . . . . . . . +1/-2 dB, 100 Hz to 10KHz

Summing Amplifier Output Level: . . . . . . . . . . . . . . . . . . . . 0 dBm (0.776 Vrms) nominal

Summing Amplifier Distortion: . . . . . . . . . . . . . . . . . . . . . . . . . 1% THD max. @ 0 dBm

Summing Amplifier Frequency Response: . . . . . . . . . . . . . . +1/-2 dB, 100 Hz to 10 KHz

Crosstalk Line to Line: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 dB min.

S/N @ -10 dBm Input: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 dB min.

10

Image 13
Contents Audio Line Driver Optional Features include Table of ContentsInspection Power Access for Installation/ServicingMounting Function Jumper Status Out Signal Connections and Card Edge Con- nector Pin AssignmentJumper Options Microphone Jumpers Switch SettingsReceive Line Input Impedance Parallel Transmit Line Impedance MatchingControls and Indicators Interface connector NumberingSecuring the Connections Operation DescriptionComponent Side Card Edge Connector Pin Assignments Solder SideReceive Amplifier Theory of Operation GeneralCompression Limiter Circuit Transmit Line AmplifierPage Page Page Power Supply IndicatorsWarranty Limited Microphone InputSpecifications Parts List Part No. Description Ckt Sym Conn Jumper Plug JP1 JP2 JP3 JP4 JP5 JP6 JP7 JP8 JP9 East Cornhusker Highway, Lincoln, Nebraska