NEC USB user manual Step

203 Eng Fr Cndn manual 12/21/98 11:20 AM Page 21

Step 15	The software has been successfully loaded. You are now ready
	to load the IntelliBase™ control panel that will be used to operate
	your IntelliBase.
Step 16	Insert the CD-ROM that is supplied with your IntelliBase.
	The setup program will run automatically. If the setup program
	does not automatically run, follow Steps 17 and 18,
	otherwise proceed directly to Step 19.
Step 17	Select the Windows Start menu and click the Run option.

Step 18 Type “x:/setup.exe” replacing x with the drive letter of your CD-ROM drive. Then click the OK button.

17