![](/images/new-backgrounds/1158248/15824855x1.webp)
V600UserGuide.book Page 24 Tuesday, March 21, 2000 8:26 AM
KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector
Troubleshooting
If you don’t find the answer to your problem here, visit our Web site at www.kodak.com/go/projectors for the latest updates on troubleshooting.
Power Indicator
The power indicator on the keypad provides you with information about the condition of the projector.
Light Status | Condition |
|
|
|
|
Blinking | Lamp is off but live power cord is |
| connected to the projector. |
| Projector is in standby mode. |
| OR |
| Lamp is off and fan is running. |
| Projector is cooling down. |
|
|
Steady | Lamp is on and fan is running. |
| Projector is ready. |
|
|
Two blinks | Scaling chip is malfunctioning. |
| Call |
|
|
Three blinks | RAM is malfunctioning. |
| Call |
|
|
Four blinks | I2C bus is malfunctioning. |
| Call |
|
|
Five blinks | Lamp is malfunctioning. |
| Call |
|
|
Six blinks | Fan is malfunctioning. |
| Call |
|
|
24