Kodak V600 Zoom manual Sound, Remote Control

V600UserGuide.book Page 28 Tuesday, March 21, 2000 8:26 AM

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector

Sound

Problem		Cause and Solution
No sound.	• Adjust volume.
	•	Verify audio / input connections.
	•	Adjust audio source.
Poor sound quality.	• Make sure you are connected to the
		earphone jack on your laptop or line out
		jack on your desktop.
	• Make sure the volume setting on your
		computer is halfway.
No audio-out port on the	You are not able to connect audio to the
image source.	projector.

Remote Control

Problem		Cause and Solution
Projector responds poorly	•	Make sure that the total distance from
or not at all to the remote		the remote to the projector is no more
control.		than 32 feet (10 m).
	•	Point the remote control at the screen or
		at the front of the projector.
	• Make sure nothing is blocking the
		infrared sensor on the front of the
		projector.
	• Darken the room. The lighting might be
		effecting the remote control.
	•	Replace the remote control batteries.

28