PUSH
Playing a disc
1
Press PUSH on the top of the system to open the disc tray.
2
Load in a disc with the label side facing up, then close the disc door.
3
Playback will start automatically. If not, pressÉÅ.
4
To stop playback, press 9.
Programming and tuning to radio stations
1
Press TUNER/BAND (TUNER on the remote) to select tuner source (FM or MW).
2
Press and hold SEARCH 1 or ¡ (4 / ¢ on the remote) until the frequency on the display starts running.The radio automatically tunes to a station of sufficient reception.
3
Press PROGRAM (PROG on the remote) to activate programming. “PROG” flashes on the display.
4
Press PRESETí/ë (S T on the remote) to allocate a number (FM: 1 to 20;AM: 1 to 10)
5
Press PROGRAM (PROG on the remote) again to confirm the setting. “PROG” disappears from the display.
6
Press PRESETí/ë (S T on the remote) until the desired preset station is displayed.
Tip
Detailed playback features and additional functions are described in the accompanied owner's manual.
Notes for remote control:
–First, select the source you wish to control by pressing one of the source select keys on the remote control (VCD/CD or TUNER, for example).
–Then select the desired function ( 2;, í, ë for example).
2006 C Koninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com |