Matchprint Professional Server Network Guide for Windows 2000
2. Click on the Advanced tab to see how this NIC is configured.
Figure 12
Figure 12 shows a simplified list of Network Parameters and Current Values. This is a similar but short list than in Figure 9. The default settings are pictured above.
3. To test the NIC, select the Diagnostics tab:
Figure 13
Warning: The Loopback box is checked by default. If you are connected to the network with an Ethernet cable, you must
4.Un-check the Loopback box and then click on the Run Tests button, click the Yes button and tests will commence. Results of the Run Tests diagnostics will be displayed in the Pass/Fail column of the Diagnostics window.
2003 Kodak Polychrome Graphics. All rights reserved. | Page 12 of 23 |