Kodak KY0730483 manual AppleTalk Zone, Network Interface Card NIC

Matchprint Professional Server Network Guide for Windows 2000

AppleTalk Zone:

To select the AppleTalk Zone this computer should appear in, click on AppleTalk Protocol (Figure 5) and then click the Properties button.

Use the arrow next to the box to bring up the list of available AppleTalk Zones.

Figure 7

Select the AppleTalk Zone you want the Matchprint Professional Server computer to appear in. Click OK when done.

If there are no AppleTalk zones listed, see the No AppleTalk Zones in section 4. Network Troubleshooting tips below for a possible solution.

Network Interface Card (NIC):

The Matchprint Professional Server contains an integrated Intel Pro/100 VE NIC. This is configured to Auto detect the network linkspeed and duplex mode. For most up-to-date networks this should function correctly. Some older networks are not compatible with Autodetect. In that case you may have to manually configure the Intel Pro/100 VE NIC for you network speed and duplex mode. To check or change the NIC configuration:

1.Logon to the Matchprint Professional Server DFE as the Administrator. There are several ways to get to the setup for the NIC card. For simplification, we’ll continue from the Local Area Connection Properties window (Figure 5) above.

2.Click the Configure button. The Intel(R) Pro/100 VE Network Connection Properties window is displayed:

2003 Kodak Polychrome Graphics. All rights reserved. Page 9 of 23