Effects of Mechanical and Chemical Variations
Figures 2 through 12 illustrate some of the photographic effects of mechanical and chemical variations on KODAK VISION Color Print Control Strips exposed on 2383 Film compared to effects on batch codes 6101 (35 mm) and 6102 (16 mm) and above. Each plot shows the effect of a change in a process variable (horizontal axis), on the dye density of the processed film (vertical axis). These density plots are deviated against the standard level for each variable (e.g., standard level for the variable is represented by a zero density deviation).
The magnitude of the changes shown in these plots should not be considered to be process control limits. Also, the data presented are qualitative, not quantitative. The plots were derived from experiments using small laboratory machines in which all constituents were held constant except the variable being studied. Hence, the figures should be used only as trend charts and guides. If two or more process variables are changed, the resulting photographic effect illustrated may not be additive. Interactions can occur that produce effects other than those predicted by addition. The plots in this publication are representative only; they do not contain all possible solution problems. Most of the important photographic effects take place in the developer.
KODAK VISION Color Print Control Strips, Process | 3 |