Whirlpool RF302BW manual Using your range, Using the Surface Units, Surface Unit Markers

Using your range

Using the Surface Units

Surface Unit Markers

The solid dot in the surface unit marker shows which surface unit is turned on by that knob.

Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF.

Surface Unit

Indicator lights

One of the surface unit indicator lights on the control panel will glow when a surface unit is on.

Burn and Fire Hazard

Be sure all control knobs are turned to OFF and all indicator lights are OFF when you are not cooking. Someone could be burned or a fire could starl if a surface unit is accidentally

left ON.

Until you get used to the settings, use the following as a guide. For best results, Stati cooking at the high settings; then turn the control knob down to continue cooking.

Use	HI to start		Use MED-HI		Use MED		Use MED-LO		Use LO to
foods		cook-	to hold	a	for gravy,		to keep	food	keep	food
ing;	to bring		rapid	boil; to	puddings		cooking	after	warm	until
liquids		to a	fry chicken		and	icing; to	starting	it	ready	to
boil.			or pancakes.		cook	large	on a higher		serve. Set the
					amounts of		setting.		heat	higher
					vegetables.				or lower
									within	the LO
									band	to keep
									food	at the
									temperature
									you want.