Chapter 5
On Mac OS X:
1
2Select Library, then select Printers.
3Open the Kodak folder, then
Connecting to a Computer
A USB cable is required to connect to a computer. Use the USB cable that came with your Kodak EasyShare camera. To purchase one separately, see a retail dealer of Kodak products or visit www.kodak.com/go/printerdock.
CAUTION:
Make sure your camera is NOT in the printer dock when you are connecting to the computer.
1Make sure the power is connected to the printer dock (see Connecting the Power, page 5), and the Kodak EasyShare printer dock 6000 software is installed on the computer (see Installing the Software, page 24).
2 Plug the labeled end of a USB cable into the labeled USB port on your computer. See your computer documentation for details.
3 Plug the other end of the USB cable into the square USB connector on the back of the printer dock.
4 Route the cable through the channel located on the underside of the printer dock, so that the cable does not interfere with the paper path.
26