Kodak 5300 manual Troubleshooting, AiO Fails to Power On, Bluetooth Device not Recognized

Page 90
Troubleshooting

Chapter 8

Printer Access Door Message

Message

Cause

Action/Solution

Printer access door open

The Printer access Door on the

Close the Printer Access Door.

Close the printer access door.

top of the printer is open while

 

 

printing.

 

Scanner Message

Message

Cause

Action/Solution

 

 

 

Scan operation failed. Please try

Scan operation initiated from the

Retry the scan operation.

again.

printer fails to communicate with

 

 

the computer within a timeout

 

 

period. The computer was

 

 

supposed to start the scan

 

 

operation.

 

Bluetooth Message

Message

Cause

Action/Solution

 

 

 

Bluetooth connection lost.

Bluetooth

Check the connection and

Check connection and resend.

communication/connection

resend.

 

dropped while downloading a file

 

 

to the printer.

 

Troubleshooting

AiO Fails to Power On

The power supply is not properly connected.

1Make sure the power cord is connected to the power supply and plugged into a grounded power outlet or power strip.

2If you are using a power strip, make sure it is turned on.

3If you are using a switched power outlet, make sure the switch is on.

4Make sure the power outlet is supplying power.

5If none of the above corrects the problem, contact Kodak support.

Bluetooth Device not Recognized

Probable Cause 1

The internal Bluetooth radio in the device may be turned off.

Corrective Action

Make sure the device is on and within range of the Bluetooth radio signal (30 ft., or 10 meters).

NOTE: The Bluetooth technology enabled device must use an BIP, OPP, or FTP profile.

86

Kodak EasyShare 5300 AiO

Image 90
Contents EasyShare All-in-One Printer User’s GuideEastman Kodak Company Rochester, New York Eastman Kodak Company Kodak and EasyShare are trademarks of Eastman Kodak CompanyP/N 1K2099 Getting Started Table of ContentsProduct Overview Handling and Loading PaperSupport MaintenanceScan Appendix1 Product Overview Main ComponentsName Control Panel LayoutNumber DescriptionStatus Lights The following tables contain information on the EasyShare AiO lightsPower Light on Power Cord On/Off Light Photo Tray Status Light Attention Light LCD Display Screen Default Display Settings Memory Card Slots and USB PortPhotos Supported Memory Cards 2 Getting Started Connect PowerInstall the Printhead RISK OF ELECTRICAL SHOCK7 Install the ink cartridges 3 Remove the printhead from its bag5 Place the printhead into the carriage Install Ink Cartridges 1 Printhead 2 Color ink cartridge 3 Black ink cartridgeInstall the Duplexer Startup Menus Menu ButtonPhoto Button or `or ` Copy Button Demo Sheet Scan ButtonHelp Button Transfer Photos Configuring Settings2 Press b to select Photo Print Settings Use Print Order if FoundButton Sounds Scene BalanceAdd Date to Prints Minutes to StandbyDate and Time Set LanguageReset All Settings 2 Press b until Reset All Settings is selected 3 Press OKChapter 3 Handling and Loading Paper The Scanner GlassLoad Main Tray 5 Lower the output tray 6 Pull the extender tray out Handling and Loading PaperLoad Photo Tray Load Envelopes Use letter or A4 designed for use with ink jet printers label sheets Load Labels6 Close the output tray 1 Ensure that none of the pages are sticking togetherPage Size 4 PrintNon-photo Paper Print Quality BorderlessTwo-sided Printing Print Photos from a CameraPrint Photos from the Control Panel WatermarkIndex Print Print Photos from a Proofsheet Tagged Photos DPOFUser-friendly Name Bluetooth PrintingRange PrintingLayouts Panoramic photosPrint with Computer 1 Click Print and Share Pictures EasyShare„ 3.5 X 5 inches „ 4 X 6 inches „ 5 X 7 inches „ 8 X 10 inches Chapter Set Print Layout 1 Press Photo. The Print menu is displayed with Layout selected2 Press or ` to change the print layout 1 per page bordered 3.5x5 Inch Paper1 per page borderless 3 per page4x6 Inch Paper 5x7 Inch Paper 8x10 Inch Paper US Letter Panoramic A4 Paper A5 Paper A6 Paper B5 Paper Index SheetUS Letter/A4 Index Sheet Setting Print Options Set Number of Prints4x6 Index Sheet Set Color Save SettingsPreviewing Photos Set Print QualityPreview Mode Zoom PhotosMultiview 4 Press OK to preview the selected photo 5 Press Start to print Chapter 5 Copy Copy with Control PanelSame Size Copy Fit to Page Copy Scale Percent Copy Photo Layout Copy See Set QualitySet Color Setting Copy OptionsSet Number of Copies Set QualityChange Brightness Save Copy SettingsPreviewing Copies Set PreviewZoom and Crop Scan with Control Panel Save Scan Settings6 Scan Scanning PhotosScanning Documents Scan to ApplicationScan to Memory Card Scan to File Scan to ApplicationScan to Memory Card 7 Maintenance Clean the Scanner GlassGeneral Care Clean the Scanner Lid Print Diagnostic SheetFormat Memory Card Ink Cartridges Firmware Upgrade2 Under General Links, click Maintenance 3 Click Firmware Upgrade Check Ink LevelsReplace Ink Cartridges 1 Print head 2 Color ink cartridge 3 Black ink cartridge6 Slide the ink cartridge into the printhead To clean printhead from computer Clean Printhead4 Under General Links, click Maintenance 3 Under General Links, click Maintenance 4 Click Printhead CleaningTo clean printhead from control panel Replace Printhead5 Remove the old printhead 6 Remove the printhead from its bag 8 Place the printhead into the carriage10 Reinstall the ink cartridges Chapter 8 Support Limited WarrantyLimited Warranty Coverage Contact KodakLimitations Your RightsOutside the United States and Canada Telephone Customer Support Customer Support Phone Numbers Messages The following tables explain the EasyShare AiO printer messagesPaper Messages Paper Messages Bluetooth Device not Recognized TroubleshootingAiO Fails to Power On Probable CauseMultiple Paper Feed Device not RecognizedInk Cartridge Color/Black Cartridge Not RecognizedNo Communication with Computer No Paper FeedCheck the paper Paper Jam Printer not RespondingIf you receive a Printer not Responding message Wrong Paper Size Print TroubleshootingTransfer Pictures Failure Envelope Printing IncorrectPicture Will Not Print Photo Print SmudgedPictBridge Camera not Detected Pictures CroppedPrint Too Dark Print Skewed or SlantedPrint Spotted Print Too LightPrinting Stops Slow PrintingWhite Edges on Borderless Prints See Set Copy Quality or Copy Settings Copy TroubleshootingScan Troubleshooting See Change Brightness or Copy SettingsScanned Image Blank Proofsheet Scan UnsuccessfulChapter All-in-One Specifications 9 AppendixComputer Requirements Paper Types Supported Paper TypesSupported Paper Sizes UsageTray Parts SafetyPower LocationRegulatory Compliance EnvironmentFCC Compliance and Advisory Waste Electrical and Electronic Equipment labeling FCC and Industry CanadaCanadian DOC statement Notice to Users in the European Economic AreaThis equipment has been certified by the manufacturer in accordance with Directive 1999/5/EC Annex Chapter Glossary WEP Wired Equivalent Privacy Wi-Fi Wireless Fidelity WLAN Wi-Fi Local Area Network WPA Wi-Fi Protected AccessGlossary Index 1K2099 1K2099 1K2099 Scan SettingsReset Requirements
Related manuals
Manual 20 pages 1.41 Kb

5300 specifications

The Kodak 5300 is a high-performance digital printing system designed to cater to a wide range of printing needs, particularly in commercial and enterprise environments. Renowned for its efficiency, quality, and versatility, the 5300 is equipped with advanced features that set it apart from its competitors.

One of the main highlights of the Kodak 5300 is its impressive print quality. Utilizing Kodak’s proprietary imaging technology, the printer consistently produces sharp, vibrant images with exceptional color reproduction. This is achieved through a high-resolution printing capability that allows fine details to be captured precisely, making it perfect for tasks that require meticulous attention to image clarity, such as photo reproduction, marketing materials, and high-end graphics.

In terms of speed, the Kodak 5300 does not disappoint. It boasts a high-speed printing mechanism that can deliver a substantial volume of prints in a shorter amount of time. This makes it an ideal choice for businesses that face demanding deadlines and need to maintain a fast-paced workflow without compromising on quality.

The Kodak 5300 is also designed with user-friendliness in mind. Its intuitive interface allows operators to easily navigate through various settings and options, minimizing the learning curve for new users. Additionally, the system supports various media types and sizes, further enhancing its flexibility and functionality. Whether printing on glossy paper, card stock, or specialty media, the 5300 handles different formats with ease.

Another standout feature is its connectivity options, which include USB and network capabilities. This flexibility enables seamless integration into existing systems, allowing businesses to connect the printer to their network for shared access among multiple users. This is particularly beneficial in office environments where efficient resource sharing is a priority.

Moreover, the Kodak 5300 incorporates advanced ink technology that ensures consistent performance and reduces maintenance downtime. The printer's ink system provides high durability and fade resistance, ensuring that prints maintain their quality over time, whether displayed indoors or outdoors.

In conclusion, the Kodak 5300 stands out as a robust digital printing solution that combines quality, speed, and adaptability to meet the evolving needs of modern businesses. With its advanced technologies and user-friendly features, it continues to be a preferred choice for professionals seeking reliable printing capabilities.