Kodak 5300 manual Printing Stops, Slow Printing, White Edges on Borderless Prints, Check the paper

Page 97

Printing Stops

Support

Printing Stops

Printing stops during mid-print. Paper stops feeding, and Status light may blink.

IMPORTANT: For best result, use only Kodak Ink cartridges and paper for your printer.

Check the paper

1Disengage the photo tray if engaged.

2Check the paper access on the back of the printer.

3Remove any loose paper from the printer.

4Inspect the paper supplies and reload with new paper if necessary.

5Carefully "fan" the paper to keep the sheets from sticking together.

6Reload the paper trays. Do not overload.

7Re-engage the photo tray, if desired, and then press Start to resume printing.

Slow Printing

NOTE: When printing a large number of prints, printing may slow down to prevent the print head from overheating.

Make sure the printer is not placed in direct sunlight or is not operating in a high-temperature environment (higher than 95° F, or 35° C).

Close unnecessary software applications.

Make sure your computer meets the minimum system requirements. Upgrade your system if necessary.

White Edges on Borderless Prints

Probable Cause

White edges can appear when there are slight misalignments between the printer and paper. Some software applications are able to “hide” these small misalignments so that the prints look borderless like they are supposed to.

Corrective Action

Use the application's Fit to Page/Fill Page option, or resize the picture so it is slightly larger than the paper size.

User’s Guide

93

Image 97

Contents All-in-One Printer User’s Guide EasyShareKodak and EasyShare are trademarks of Eastman Kodak Company Eastman Kodak Company Rochester, New York Eastman Kodak CompanyP/N 1K2099 Product Overview Table of ContentsGetting Started Handling and Loading PaperScan MaintenanceSupport AppendixMain Components 1 Product OverviewNumber Control Panel LayoutName DescriptionThe following tables contain information on the EasyShare AiO lights Status LightsPower Light on Power Cord On/Off Light Photo Tray Status Light Attention Light LCD Display Screen Memory Card Slots and USB Port Default Display SettingsPhotos Supported Memory Cards Install the Printhead Connect Power2 Getting Started RISK OF ELECTRICAL SHOCK3 Remove the printhead from its bag 7 Install the ink cartridges5 Place the printhead into the carriage 1 Printhead 2 Color ink cartridge 3 Black ink cartridge Install Ink CartridgesInstall the Duplexer Startup Menu Button Menusor ` Photo Buttonor ` Copy Button Scan Button Demo SheetHelp Button 2 Press b to select Photo Print Settings Configuring SettingsTransfer Photos Use Print Order if FoundAdd Date to Prints Scene BalanceButton Sounds Minutes to StandbySet Language Date and Time2 Press b until Reset All Settings is selected 3 Press OK Reset All SettingsKodak EasyShare 5300 AiO The Scanner Glass 3 Handling and Loading PaperLoad Main Tray Handling and Loading Paper 5 Lower the output tray 6 Pull the extender tray outLoad Photo Tray Load Envelopes 6 Close the output tray Load LabelsUse letter or A4 designed for use with ink jet printers label sheets 1 Ensure that none of the pages are sticking togetherNon-photo Paper Print Quality 4 PrintPage Size BorderlessPrint Photos from the Control Panel Print Photos from a CameraTwo-sided Printing WatermarkIndex Print Tagged Photos DPOF Print Photos from a ProofsheetRange Bluetooth PrintingUser-friendly Name PrintingPrint with Computer Panoramic photosLayouts 1 Click Print and Share Pictures EasyShare„ 3.5 X 5 inches „ 4 X 6 inches „ 5 X 7 inches „ 8 X 10 inches Kodak EasyShare 5300 AiO 1 Press Photo. The Print menu is displayed with Layout selected Set Print Layout2 Press or ` to change the print layout 1 per page borderless 3.5x5 Inch Paper1 per page bordered 3 per page4x6 Inch Paper 5x7 Inch Paper 8x10 Inch Paper US Letter Panoramic A4 Paper A5 Paper A6 Paper Index Sheet B5 PaperUS Letter/A4 Index Sheet Set Number of Prints Setting Print Options4x6 Index Sheet Previewing Photos Save SettingsSet Color Set Print QualityZoom Photos Preview ModeMultiview 4 Press OK to preview the selected photo 5 Press Start to print Kodak EasyShare 5300 AiO Copy with Control Panel 5 CopySame Size Copy Fit to Page Copy Scale Percent Copy See Set Quality Photo Layout CopySet Number of Copies Setting Copy OptionsSet Color Set QualityPreviewing Copies Save Copy SettingsChange Brightness Set PreviewZoom and Crop 6 Scan Save Scan SettingsScan with Control Panel Scanning PhotosScan to Application Scanning DocumentsScan to Memory Card Scan to Application Scan to FileScan to Memory Card Clean the Scanner Glass 7 MaintenanceGeneral Care Print Diagnostic Sheet Clean the Scanner LidFormat Memory Card 2 Under General Links, click Maintenance 3 Click Firmware Upgrade Firmware UpgradeInk Cartridges Check Ink Levels1 Print head 2 Color ink cartridge 3 Black ink cartridge Replace Ink Cartridges6 Slide the ink cartridge into the printhead 4 Under General Links, click Maintenance Clean PrintheadTo clean printhead from computer 3 Under General Links, click Maintenance 4 Click Printhead CleaningReplace Printhead To clean printhead from control panel8 Place the printhead into the carriage 5 Remove the old printhead 6 Remove the printhead from its bag10 Reinstall the ink cartridges Kodak EasyShare 5300 AiO Limited Warranty Coverage Limited Warranty8 Support Contact KodakYour Rights LimitationsOutside the United States and Canada Telephone Customer Support Customer Support Phone Numbers The following tables explain the EasyShare AiO printer messages MessagesPaper Messages Paper Messages AiO Fails to Power On TroubleshootingBluetooth Device not Recognized Probable CauseInk Cartridge Device not RecognizedMultiple Paper Feed Color/Black Cartridge Not RecognizedNo Paper Feed No Communication with ComputerCheck the paper Printer not Responding Paper JamIf you receive a Printer not Responding message Transfer Pictures Failure Print Troubleshooting Wrong Paper Size Envelope Printing IncorrectPictBridge Camera not Detected Photo Print SmudgedPicture Will Not Print Pictures CroppedPrint Spotted Print Skewed or SlantedPrint Too Dark Print Too LightSlow Printing Printing StopsWhite Edges on Borderless Prints Scan Troubleshooting Copy TroubleshootingSee Set Copy Quality or Copy Settings See Change Brightness or Copy SettingsProofsheet Scan Unsuccessful Scanned Image BlankKodak EasyShare 5300 AiO 9 Appendix All-in-One SpecificationsComputer Requirements Supported Paper Types Paper TypesUsage Supported Paper SizesTray Power SafetyParts LocationEnvironment Regulatory ComplianceFCC Compliance and Advisory Canadian DOC statement FCC and Industry CanadaWaste Electrical and Electronic Equipment labeling Notice to Users in the European Economic AreaThis equipment has been certified by the manufacturer in accordance with Directive 1999/5/EC Annex Kodak EasyShare 5300 AiO Glossary WLAN Wi-Fi Local Area Network WPA Wi-Fi Protected Access WEP Wired Equivalent Privacy Wi-Fi Wireless FidelityGlossary Index Reset Scan Settings1K2099 1K2099 1K2099 Requirements

Related manuals

Manual 20 pages 1.41 Kb