Chapter 6
Battery Charging Lights
Light Status | Cause | Action/Solution |
No lights | Camera is not on the printer dock | Place the camera on the |
| or is improperly seated. | printer dock (page 14) or |
|
| readjust the camera |
|
| placement. |
| Camera is turned on. | Turn off the camera. |
| Correct battery is not installed. | Install a Kodak EasyShare |
|
| |
|
| pack (page 11). |
Green lights |
|
|
| Battery is less than half charged. | Camera is on the dock. |
|
| Leave camera on the dock |
| Battery is more than half charged. to continue charging. | |
| Battery is fully charged. | Leave camera on the dock |
|
| to maintain charge. |
Red light | Battery is not properly installed. | |
(blinking) |
|
|
| Battery or connector pin is | Check for damage. |
| damaged. |
|
| Camera and battery have been | Slowly return the camera |
| exposed to extreme | and battery to room |
| temperatures. | temperature. |
47