Kyocera KR1 manual Select TCP/IP

2.Hold the RESET button for 10 seconds, and then release it.

Note: The POWER LED will illuminate green, and the STATUS LED will blink green, indicating proper connections.

3.Connect the LAN cable to one of the four LAN ports. The LED of the LAN port you select will illuminate green.

4.Launch your web browser. An error message may appear. Disregard this message, and continue with the steps below.

5.Enter 192.168.0.1 in the address line of your web browser, and press GO.

6.Select Browse. A dialogue box will appear prompting you to select the latest firmware version. Select your desired firmware version, and click Open.

7.Click Send, to send the latest firmware to your Kyocera KR1 Mobile Router.

Caution: Please do not click any buttons once the firmware download process has started. Doing so could disrupt the firmware download process, and cause your Kyocera KR1 Mobile Router to malfunction.

Note: Your Kyocera KR1 Mobile Router and computer may not provide an accurate indication of activity. An error screen may appear. This is normal. Please be patient. The firmware recovery process will take five to ten minutes. The firmware recovery is complete when the WLAN LED blinks green.

Reset the Dynamic IP–MAC

1.Open System Properties.

2.Select Network.

3.Show Built-In Ethernet.

4.Select TCP/IP.

11