Adding a USB Printer
The primary CUPS interface can be accessed on the local computer using a web browser. The address for the CUPS interface is: http://localhost:631/
Step | Procedure | |
|
| |
1 | Attach Power and USB to the printer. | |
|
| |
2 | From a Terminal window, run lshal to retrieve the list of devices. | |
|
| |
3 | Refer to the Example Output for lshal below for a sample of output to look for to identify | |
| the printer. Record the Device URI to be able to add the printer. | |
| Example Device URI: | |
| /org/freedesktop/Hal/devices/usb_device_9b0_2112_A8010217_if0_printer_A8010217 | |
|
| |
4 | Choose Add Printer. (Note: If you are asked for a username and password, enter your | |
| login username and password or the “root” username and password.) | |
|
|
|
5 | a. | Enter a Name, Location and Description for the Printer. |
| b. | Click Continue. |
|
|
|
6 | a. | If an entry exists in the dropdown, select the HAL Printing backend option |
|
| OR |
| b. | Select Internet Printing protocol (ipp) |
| c. | Click Continue. |
|
| |
7 | a. Enter the Device URI recorded previously using the HAL printer Backend | |
|
| Example: |
|
| hal:///org/freedesktop/Hal/devices/usb_device_9b0_2112_A8010217_if0_printer_A8010217 |
| b. Click Continue. | |
|
|
|
8 | a. | Select Fargo Electronics from the Make list. |
| b. | Click Continue. |
| Note: If Fargo Electronics is not listed in the Make list, it may be necessary to restart | |
| CUPS and begin the process to add the printer again. | |
|
|
|
9 | a. | Select M30e (en) from the Model list. |
| b. | Click Add Printer. |
|
| |
10 | After installation is complete, it may be necessary to specify the page scaling options for | |
| the Print Queue. | |
|
|
|
Fargo M30e CUPS Driver User Guide (Rev. 1.0.3) | 10 |