FARGO electronic M30e manual Print and Overlay Options, Reviewing the Front Print Area

Print and Overlay Options

Reviewing the Front Print Area

Command Line Usage	CUPS Options	Description
PrintAreaFront =	Front Print Area =	The full card will be printed,
FullCardPrintAndOverlay	Full Card Print	and overlay will be applied.
	and Overlay
PrintAreaFront =	Front Print Area =	An area (corresponding to
OmitSmartChipPrintAndOverlay	Omit Smart Chip	the ISO location for a smart
	Print and Overlay	chip) will be omitted from
		print and overlay.
PrintAreaFront =	Front Print Area =	An area (corresponding to
OmitMagStripePrintAndOverlay	Omit Mag Stripe	the ISO location for a
	Print and Overlay	Magnetic stripe) will be
		omitted from print and
		overlay.
PrintAreaFront =	Front Area Print =	An area (corresponding to
OmitSignatureAreaPrintAndOverlay	Omit Signature	the ISO location for a
	Area Print and	Signature Stripe) will be
	Overlay	omitted from print and
		overlay.
PrintAreaFront =	Front Area Print =	An area 25mmL X 27mmW
VisualSecurityUpperLeftVerimark	Visual Security	in the upper left corner of the
	Upper Left	card will be omitted from
	Verimark	print and overlay.
PrintAreaFront =	Front Area Print =	An area 23mmL X 23mmW
VisualSecurityUpperLeftHolomark	Visual Security	in the upper left corner of the
	Upper Left	card will be omitted from
	Holomark	print and overlay.
PrintAreaFront =	Front Area Print =	An area 25mmL X 27mmW
VisualSecurityUpperRightVerimark	Visual Security	in the upper right corner of
	Upper Right	the card will be omitted from
	Verimark	print and overlay.
		Continued on the next page

Fargo M30e CUPS Driver User Guide (Rev. 1.0.3) 20