FARGO electronic M30e manual Using the Image Color Capabilities

Using the Image Color Capabilities

Following the Dye-Sub Intensity Procedure

Command Line	CUPS option	Description
Usage
DyeSubIntensity=0	Dye-Sub Intensity (YMC) = 0	1. Adjust the Dye-Sub Intensity
<-50 to 50>		value higher to use more heat
		when transferring dye-sub
		colors to the card. (Note: This
		will produce a darker, more
		saturated image.)
		2. Adjust the dye-sub Intensity
		value lower to use less heat
		when transferring dye-sub
		colors to the card. (Note: This
		will produce a lighter print.)
Following the Resin Heat Front Procedure
Command Line	CUPS option	Description
Usage
ResinHeatFront=0	Resin Heat Front (K) = 0	1. Adjust the Resin Heat Front
<-100 to 100>		value higher to use more heat
		to transfer resin to a card.
		2. Adjust the Resin Heat Front
		value lower to reduce the
		amount of heat (used to
		transfer resin to the card).

Fargo M30e CUPS Driver User Guide (Rev. 1.0.3) 29