CHAPTER 3 GETTING READY FOR PRINTING
7
8
9
Press the N or M key to select “4. IP address”.
Inch specifications
Set printer:
4.IP address
Metric specifications
Set printer:
4.IP address
Press the Enter key.
Use the MNOP cursor keys to input the IP address. Inch specifications
IP address:
0. 0. 0. 0
Metric specifications
IP address:
0. 0. 0. 0
In order to set the IP address to “192.168.0.1”, perform the following procedure.
1Press the N or M key to display “192”. Inch specifications
IP address:
192. 0. 0. 0
Metric specifications
IP address:
192. 0. 0. 0
2Press the P key. The next value will flash.
Inch specifications
IP address: 192. 0. 0. 0
Metric specifications
IP address: 192. 0. 0. 0
3Press the N or M key to display “168”. Inch specifications
IP address:
192.168. 0. 0
Metric specifications
IP address:
192.168. 0. 0
4Press the P key. The next value will flash. Inch specifications
IP address: 192.168. 0. 0
Metric specifications
IP address: 192.168. 0. 0
5Press the P key. The next value will flash. Inch specifications
IP address: 192.168. 0. 0
Metric specifications
IP address: 192.168. 0. 0
6Press the N or M key to display “1”. Inch specifications
IP address: 192.168. 0. 1
Metric specifications
IP address: 192.168. 0. 1
NOTE
Press the Stop key if you want to enter the address once again from the beginning. The displayed IP address will return to its previous value.
10 Press the Enter key.
11 | Use the same procedure in order to set the “5. Subnet |
mask”, “6. Gateway”, and “7. DNS server” information. |
12 Once you have completed all of the required settings, press the N or M key to select “End” and then press the Enter key.
Inch specifications
Set printer:
End
Metric specifications
Set printer:
End