0x0f001000 0x0f001009 | NEC VR4133 instruction

Operating Precautions for VR4133 TM

No. 5	Write access to external I/O area
	(Direction of usage)
	Details
	A write cycle to external I/O or Flash area after
	• a CPU read/write access to a BCU-managed registersNote
	• or a CPU I/O read after a bus hold
	• or a DMA I/O read after a bus hold
	• or a Flash memory read

may drive the wrong write data. To avoid this situation, one of the following workarounds must be implemented:

(1)execute a dummy register access to a non-BCU-managed registerNote

(2)execute a dummy external I/O write or Flash write before the actually intended external write

Note: BCU-managed registers are all registers except

	SCU registers		0x0f001000 – 0x0f001009
	SDRAMU registers		0x0f000400 – 0x0f000409
	PCIU registers		0x0f000c00 – 0x0f000d43
	ETHER registers		0x0f001400 – 0x0f00193f
	CEU registers		0x0f000e00 – 0x0f000e7f

No. 6	Branch delay slot of JAL(X) instruction in MIPS16 mode
	(Specification change notice)
	Details
	A load of PC relative instruction must not be placed in the delay slot of a JAL(X) instruction in
	MIPS16 mode. Therefore one of the following countermeasures must be taken:
	(1)	Do not locate a load of PC relative instruction in the delay slot of a JAL(X) instruction in
		MIPS16 mode.
	(2)	Do not use JAL(X) instructions in MIPS16 mode; use JAL(X) in native mode instead.
	As implementing these countermeasures requires changes in the compilers, MIPS16 will be
	deleted from the VR4133 specification.

6	Customer Notification

0x0f001000 – 0x0f001009