NEC LCD3215 Connecting a Personal Computer, Connect the LCD Monitor to a Personal Computer

Connecting a Personal Computer

Connecting your computer to your LCD monitor will enable you to display your computerÕs screen image. Some video cards and a pixel clock over 165MHz may not display an image correctly.

Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically.

<Factory preset signal timing>

Resolution	Scanning frequency		Remarks
	Horizontal	Vertical
640 x 480	31.5kHz	60Hz
800 x 600	37.9kHz	60Hz
1024 x 768	48.4kHz	60Hz
1280 x 768	48kHz	60Hz
1360 x 768	48kHz	60Hz	Recommended resolution
1280 x 1024	64kHz	60Hz	Compressed image
1600 x 1200	75kHz	60Hz	Compressed image

Connect the LCD Monitor to a Personal Computer

¥To connect the RGB2 connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin).

¥To connect the RGB3 connector (BNC) on the LCD monitor, use a mini D-sub 15 pin to BNC x 5 signal cable (sold separately). Select RGB3 from the INPUT button.

¥When connecting one or more LCD monitors, use the RGB OUT connector (mini D-sub 15 pin) (BNC INPUT only).

¥AUDIO IN 1, 2 and 3 can be used for audio input. To select audio source [AUDIO:1], [AUDIO:2] or [AUDIO:3] press the AUDIO INPUT button.

LCD monitor

BNC x 5

Mini D-sub 15 pin

To analog RGB output

Mini D-sub 15 pin

To audio output

PC or IBM compatible

Second LCD monitor

English-14