NEC LCD4215, LCD3215 user manual English-21

Setting

PICTURE
BRIGHTNESS		Adjusts the overall image and background brightness.
CONTRAST		Adjusts the image brightness in relation to the input signal.
		NOTE: sRGB picture mode is standard and cannot be changed.
SHARPNESS		Adjusts the crispness of the image.
BLACK LEVEL		Adjusts the image brightness in relation to the background.
TINT		Adjusts the tint of the screen.
INPUT DVD/HD, VIDEO(S), VIDEO only
COLOR		Adjusts the color depth of the screen.
INPUT DVD/HD, VIDEO(S), VIDEO only
COLOR TEMPERATURE		Color temperature can be selected out of NATIVE, 9300K, USER, 6500K and 5000K.
		When USER is selected, R.G.B can be adjusted individually. (RGB 1,2,3 only)
COLOR CONTROL		Adjusts the levels of the Red, Green, Blue and Saturation.
INPUT RGB1, 2, 3 only		NOTE: It can be adjusted only when USER is selected by COLOR TEMPERATURE.
	USER-R	Adjusts the level of RED.
	USER-G	Adjusts the level of GREEN.
	USER-B	Adjusts the level of BLUE.
GAMMA SELECTION		Select a display gamma for best picture quality.
	NATIVE	Gamma correction is handled by the LCD panel.
	2.2	Typical display gamma for use with a PC.
	2.4	Good for video (TV, DVD, etc.)
	S GAMMA	Special gamma for certain types of movies. Raises the dark parts and lowers the light parts
		of the image.
		NOTE: sRGB picture is standard and cannot be changed.
NOISE REDUCTION		Adjusts the amount of noise reduction.
INPUT VIDEO(S), VIDEO only
FILM MODE		Selects Film mode function. ( AUTO)
INPUT DVD/HD, VIDEO(S), VIDEO only		This mode is better suited for movies, which is converted 24 Frames/sec source to DVD Video.
PICTURE RESET		Resets the all settings within the PICTURE menu back to factory setting.
ADJUST
AUTO SETUP		Press ÒSETÓ button to automatically adjust screen size, horizontal position, vertical position,
INPUT RGB2, 3 only		clock, clock phase, white level and black level.
AUTO ADJUST		Selecting ON when changing the timing, the horizontal position, vertical position and
INPUT RGB2, 3 only		clockphase will adjust automatically.
H POSITION		Controls the horizontal position of the image within the Display area of the LCD.
		Press + to move right. Press - to move left.
V POSITION		Controls the vertical position of the image within the Display area of the LCD.
		Press + to move up. Press - to move down.
CLOCK		Press + to expand the width of the image on the right of the screen.
INPUT RGB2, 3 only		Press - to narrow the width of the image on the left.
CLOCK PHASE		Adjusts the visual ÒnoiseÓ on the image.
INPUT RGB2, 3 only
ZOOM MODE		You can select ÒFULLÓ, ÒNORMALÓ, ÒDYNAMICÓ, ÒCUSTOMÓ and ÒREALÓ.
		NOTE: DYNAMIC is INPUT DVD/HD, VIDEO(S), VIDEO only.
		Selecting DYNAMIC expands 4:3 picture to fill the screen. Some of the image is lost due to
		expansion.
		Selecting ÒREALÓ image will be displayed 1 by 1pixel.

English

English-21