NEC LCD2080UXI manual Troubleshooting, No picture

Page 19

Troubleshooting

No picture

•The signal cable should be completely connected to the display card/computer.

•The display card should be completely seated in its slot.

•Check the Vacation Switch should be in the ON position.

•Front Power Switch and computer power switch should be in the ON position.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

•Check the monitor and your display card with respect to compatibility and recommended settings.

•Check the signal cable connector for bent or pushed-in pins.

•Check the signal input, “INPUT 1” or “INPUT 2”.

•Ensure the DVI input mode is set to DIGITAL when the MAC digital output is connected to the DVI-I (Input1) connector.

Power Button does not respond

•Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.

•Check the Vacation Switch on the right side of the monitor.

Image Persistence

•Image persistence is when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Message “OUT OF RANGE” is displayed (screen is either blank or shows rough images only)

•Image is displayed only roughly (pixels are missing) and OSM warning “OUT OF RANGE” is displayed: Either signal clock or resolution is too high. Choose one of the supported modes.

•OSM warning “OUT OF RANGE” is displayed on a blank screen: Signal frequency is out of range. Choose one

of the supported modes.

Image is unstable, unfocused or swimming is apparent

•Signal cable should be completely attached to the computer.

•Use the OSM Image Adjust controls to focus and adjust display by

increasing or decreasing the fine total. When the display mode is changed, the OSM Image Adjust settings may need to be readjusted.

•Check the monitor and your display card with respect to compatibility and recommended signal timings.

•If your text is garbled, change the video mode to non-interlace and use 60Hz refresh rate.

LED on monitor is not lit (no green or amber color can be seen)

• Power Switch should be in the ON position and power cord should be connected.

Display image is not sized properly

•Use the OSM Image Adjust controls to increase or decrease the Coarse total.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

No Video

•If no video is present on the screen, turn the Power button off and on again.

•Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).

No tilt

•Rotate the screen to 90˚ clockwise until you hear one click.

•Refer to the Quick Start section, “Remove monitor stand for mounting” to insure correct installation of stand.

17

LCD2080UXimanual_053105.pmd

17

6/2/05, 2:51 PM

Page 18 Page 20
Image 19
Page 18 Page 20
Contents MultiSync LCD2080UXiTM Manufacturer’s Recycling and Energy Information IndexFCC Information Canadian Department of Communications Compliance StatementContents Macintosh Adapter Quick StartFigure RL.1 Raise and Lower Monitor ScreenTilt Screen RotationSwivel Figure S.2 and Figure S.3 Remove Monitor Stand for MountingLong Cable Compensation Adjustment Control ControlsControls Language OSM control menus are available in seven languages ToolsInformation Recommended Use Safety Precautions and MaintenanceErgonomics Monitor MultiSync LCD2080UXi Specifications SpecificationsFeatures Features No picture TroubleshootingReferences Limited Warranty White Model TCO’03TCO’03 Black Model TCO’99TCO’99 Disposing of your old NEC Products Avertissement La boîte* de votre nouveau moniteur NEC MultiSync contient ContenuMettez l’ordinateur hors tension Mise en marche rapideLevez et baissez l’écran du moniteur Mise en marche rapide suitePivoter InclinerEnlever le support du moniteur pour le montage Réglage de la compensation de câble long Control CommandesAccuColor Control Systems Système de contrôle des couleurs Commandes suiteCommandes suite Informations Consignes de sécurité et d’entretien Usage recommandéErgonomie Usage recommandé suiteFiche technique NEC Display SolutionsFonctions Fonctions suite Dépannage Références Garantie limitée TCO’03 C’est une traduction de portion Anglaise de TCO’03 TCO’03 suite TCO’99 C’est une traduction de portion Anglaise de TCO’99 Mercure TCO’99 suitePlomb CadmiumElimination des anciens produits NEC Detail AppendixAppendix Appendix OFF Déclaration DE Conformité Declaration of Conformity

LCD2080UXI specifications

The NEC LCD2080UXI is a high-performance 20-inch LCD display tailored primarily for professional environments, including control rooms, broadcast studios, and corporate settings. This monitor excels in delivering exceptional image quality, reliability, and functionality, making it a popular choice for users demanding superior performance from their display technology.

One of the standout features of the LCD2080UXI is its native resolution of 1600 x 1200 pixels, which allows for sharp and precise images. The 4:3 aspect ratio is particularly beneficial for applications requiring vertical screen real estate, such as presentations and scientific data analysis. The panel also incorporates advanced TFT technology, ensuring vibrant colors and excellent viewing angles, crucial for collaborative working environments where multiple users may view the screen simultaneously.

The brightness of the LCD2080UXI is rated at 250 cd/m², which, combined with a contrast ratio of 400:1, produces vivid and striking images. This allows it to excel in various lighting conditions, providing clear visuals without compromising on quality. The LCD2080UXI also features a fast response time of 16 milliseconds, which minimizes motion blur and ghosting effects during video playback, making it suitable for multimedia applications.

In terms of connectivity, the LCD2080UXI is designed to accommodate a wide range of devices, featuring DVI-D, VGA, and composite video inputs. This versatility ensures compatibility with most modern computers, as well as older systems, making it a flexible choice for users with diverse needs. The monitor also offers multiple mounting options, including VESA-compatible mounts, allowing for easy integration into existing setups.

The LCD2080UXI prioritizes ergonomics and user comfort, featuring tilt, swivel, and height adjustment capabilities. This adaptability is essential for reducing eye strain during long usage periods. Moreover, the monitor is equipped with an Easy Setup feature, enabling quick configuration and optimizing display settings for different applications.

Another significant characteristic of the LCD2080UXI is its environmentally friendly design. NEC has incorporated energy-saving technologies into this monitor, helping users reduce their carbon footprint while maintaining performance. This commitment to sustainability, alongside its robust features and reliable performance, solidifies the NEC LCD2080UXI as an ideal choice for professionals seeking a dependable and high-quality display solution.
Top Page Image Contents