NEC LCD1980SX user manual Be changed, English-16

Tag4	Auto	Automatically adjusts the Image Position and H. Size (or V. Size) settings and Fine settings.
	(Analog input only)	Press “SELECT” to activate Auto Adjustment.
	H. Position	Controls Horizontal Image Position within the display area of the LCD.
		Press “+” or “-” to adjust.
	V. Position	Controls Vertical Image Position within the display area of the LCD.
		Press “+” or “-” to adjust.
	H. SIZE (OSD	Adjusts the horizontal (or vertical) size of the screen.
	ROTATION:	If the “Auto Adjust function” do not give you a satisfactory picture setting, a further tuning
	Landscape)	can be performed manually using the “H. Size (or V. Size)” function (dot clock). For this
	or V. SIZE (OSD	a Moiré test pattern could be used. This function may alter the width of the picture. Use
	ROTATION: Portrait)	left/Right Menuto center the image on the screen. If the H. Size (or V. Size) is wrongly
	(Analog input only)	calibrated, the result would look like on then left drawing. The image should be
		homogeneous.

	When H. SIZE value is wrong. When H. SIZE value is improved. When H. SIZE value is correct.
Fine	Improve focus, clarity and image stability by increasing or decreasing this setting.
(Analog input only)	If the “Auto Adjust function” do not give you a satisfactory picture setting, a fine tuning can
	be performed manually using the “Fine” function. It improves focus, clearity and image
	stability by increasing or decreasing this setting. For this a Moiré test pattern could be
	used. If the Fine value is wrongly calibrated, the result would look like on the left drawing.
	The image should be homogeneous.

		When FINE value is wrong. When FINE value is correct.
Tag5	Gamma Selection	Allows you to manually select the brightness level of gray-scale. There are five selections.
		NO CORRECTION, 2.2, S-CURVE, PROGRAMABLE and CUSTOM.
		S-CURVE: This setting is recommended for Video source. Grey area looks much brighter
		than NATIVE setting.
		PROGRAMABLE: The brightness of Grey-scale is changed as you like by using the
		application, which can be downloaded from our Web site (http://www.necmitsubishi.com).
		CUSTOM: The gamma value is selected from the rate of 0.5 to 4.0 by 0.1 step.
		When the COLOR PRESET is sRGB, the value is fixed at 2.2 then NOT ADJUSTABLE.
	Gamma Offset	Adjusts the black level and is performed for both analog and digital signals.
		BLACK LEVEL is effective only when the signal is analog.
		GAMMA OFFSET digitally adjusts the black level after the signal is converted
		from analog to digital.
Tag6	Color Control	Six colours for the desired colour setting (sRGB and NATIVE colour presets cannot
		be changed).
		Colour temperature increases or decreases in each preset. Press “ ” or “ ” to select
		colour. Press “+” or “-” to adjust. Press “SELECT” to customize.
		R,Y,G,C,B,M,S
		Increases or decreases Red, Yellow, Green, Cyan, Blue, Magenta and Saturation
		depending upon which is selected. The change in colour will appear on screen and the
		direction (increase or decrease) will be shown by the colour bars. Press “+” or “-” to adjust.
		NATIVE
		Original colour presented by the LCD panel that is not adjustable.

English-16