English-17 | NEC LCD1980SX guide

Tag7

Sharpness	This is a digital capability for keeping a crisp image at all signal timings. It continuously
	adjusts to maintain a distinct or soft image as you prefer, and is set independently
	according to different timings.
	Press “+” or “-” to select.

Expansion Mode	Sets the zoom method.
	FULL: The image is expanded to 1280 x 1024, regardless of the resolution.
	ASPECT: The image is expanded without changing the aspect ratio.
	OFF: The image is not expanded.
	CUSTOM1: Zoom with center fixed. The image is expanded from the rate of 1.0 to
	3.0 times individually for horizontal (H. EXPANSION) and vertical (V. EXPANSION)
	direction by 0.1 step.
	CUSTOM2: Zoom with top left corner fixed. The image is expanded from the rate of 1.0 to
	3.0 times individually for horizontal (H. EXPANSION) and vertical (V. EXPANSION)
	direction by 0.1 step.

Video Detect	Selects the method of video detection when more than one computer is connected.
	Press “+” or “-” to select.
	FIRST DETECT: The video input has to be switched to “FIRST DETECT” mode. When
	current video input signal is not present, then the monitor searches for a video signal from
	the other video input port. If the video signal is present in the other port, then the monitor
	switches the video source input port to the new found video source automatically. The
	monitor will not look for other video signals while the current video source is present.
	LAST DETECT: The video input has to be switched to the “LAST DETECT” mode. When
	the monitor is displaying a signal from the current source and a new secondary source is
	supplied to the monitor, then the monitor will automatically switch to the new video source.
	When current video input signal is not present, then the monitor searches for a video
	signal from the other video input port. If the video signal is present in the other port, then
	the monitor switches the video source input port to the new found video source
	automatically.
	NONE: The Monitor will not search the other video input port unless the monitor is
	turned on.

DVI Selection	This function selects the DVI input mode (Input 1). When the DVI selection has been
	changed, you must restart your computer. Press “+” or “-” to select.
	AUTO: By using the DVI-D to DVI-D cable, the DVI SECTION is DIGITAL.
	By using the D-SUB to DVI-A cable, the DVI SECTION is ANALOG.
	DIGITAL: DVI digital input is available.
	ANALOG: DVI analog input is available.

Off Timer	Monitor will automatically turn off after the preset time period from power on with the
	ON/OFF function. When you select “ON”, press “SELECT” and “+” or “-” to adjust.

Language	OSM control menus are available in seven languages. Press “+” or “-” to select.

OSM Position	You can choose where you would like the OSM control image to appear on your screen.
	Selecting OSM Location allows you to manually adjust the position of the OSM control
	menu left, right, down or up. Press “SELECT” to move the adjustment menu, and press
	“+” or “-” to adjust.

OSM Turn off	The OSM control menu will stay on as long as it is in use. In the OSM Turn Off submenu,
	you can select how long the monitor waits after the last touch of a button to close the
	OSM control menu. The preset choices are 10, 20, 30, 45, 60 and 120 seconds.
	Press “+” or “-” to select.

OSM Lock Out	This control completely locks out access to all OSM control functions except BRIHTNESS
	and CONTRAST. When attempting to activate OSM controls while in the Lock Out mode,
	a screen will appear indicating the OSM controls are locked out. To activate the OSM Lock
	Out function, press “+” key, then SELECT and hold down simultaneously. To deactivate the
	OSM Lock Out, press “+” key, then SELECT and hold down simultaneously.