Setup Procedure

1. Determine the installation location

CAUTION

Installing your LCD display must be done by a qualified technician. Contact your dealer for more information.

CAUTION

MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE. Failure to follow this caution may result in injury if the LCD monitor falls.

IMPORTANT

Lay the protective sheet, which was wrapped around the LCD moni- tor when it was packaged, beneath the LCD monitor so as not to scratch the panel.

2. Install the remote control batteries

The remote control is powered by 1.5V AA batteries. To install or replace batteries:

1.Press and slide to open the cover.

2.Align the batteries according to the (+) and (–) indications in- side the case.

3.Replace the cover.

1 Remove the cover

2 Insert the batteries

3 Replace the cover

CAUTION

Incorrect usage of batteries can result in leaks or bursting. NEC recommends the following battery use:

•Place "AA" size batteries matching the + and - signs on each battery to the + and - signs of the battery compartment.

•Do not mix battery brands.

•Do not combine new and old batteries. This can cause a shorten life or liquid leakage of batteries.

•Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment. Don't touch exposed bat- tery acid, it cause damage to your skin.

NOTE: If you do not intend to use the Remote Control for a long period, remove the batteries.

3. Connect external equipment (See page 11-17)

•To protect the connected equipment, turn off the main power before making connections.

•Refer to your equipment user manual.

4. Connect the supplied power cord

•The equipment should be installed close to a power outlet and should be easily accessible.

•Fully insert the prongs into the power outlet socket. Loose con- nection may cause image degradation.

NOTE: If you use this monitor at AC 220-240V, please refer to “Safety Precautions, Maintenance & Recommended Use” section of this manual for proper selection of AC power cord.

5.Switch on the power of all the attached external equipment

When connected with a computer, switch on the power of the com- puter first.

6. Operate the attached external equipment

Display the signal on the external equipment you wish.

7. Adjust the sound

Make adjustments when adjustment of the volume is required.

8. Adjust the screen (See pages 20-28)

Make adjustments when adjustment of the screen display position.

9. Adjust the image (See page 20-28)

Make adjustments when picture adjustment such as the brightness or contrast is required.

10.When monitor is installed in the portrait position

•Remove the stand (feet).

•Turn monitor counter-clockwise, so the right edge of the LCD is at the top.

11. When installing the monitor to a wall

How to remove the stand

1.Spread the protective sheet on the flat surface, such as a desk.

2.Place monitor on the protective sheet.

3.Remove 2 screws by screwdriver and place them in a safe place for reuse.

How to install stand

1.Please turn monitor off.

2.Insert claws of monitor to stand holes until clicks.

3.Fasten 2 screws(M5 x 40mm) on both sides of the monitor. Torque 280 ~ 300N•cm.

Hole of stand	Screw M5 x 40

Claw of Monitor

Stand

English-10

LCD4000e specifications

The NEC LCD4000e is a high-performance large-format LCD display that is designed to meet the needs of various professional environments, including corporate, educational, and retail settings. This model stands out for its impressive features, advanced technologies, and robust characteristics, making it an ideal choice for image-rich content applications.

One of the primary features of the NEC LCD4000e is its impressive display size. The 40-inch screen provides a wide viewing area, which is crucial for delivering impactful presentations and dynamic visual content. The screen resolution of 1920x1080 pixels ensures that images and videos are rendered with excellent clarity and detail, enhancing the viewer's experience.

The LCD4000e utilizes advanced LED backlight technology, which not only improves overall brightness but also offers energy efficiency compared to traditional backlit displays. This technology minimizes energy consumption, making the display an eco-friendly option without compromising on performance. The LED backlighting also contributes to rich color reproduction, providing deeper blacks and vibrant colors essential for effective visual communication.

Another significant highlight of the NEC LCD4000e is its user-friendly design. The display features integrated wall-mounting capabilities, which allows for versatile installation options. Whether mounted on a wall or displayed in a professional setting, the LCD4000e's slim profile and modern aesthetics fit seamlessly into any environment.

Connectivity is also a strong suit for the LCD4000e, supporting various inputs, including HDMI, DisplayPort, and VGA. This wide range of connections ensures compatibility with a variety of devices, enabling users to effortlessly switch between different content sources. The built-in speakers further enhance the multimedia experience, facilitating audio playback without the need for external speakers.

The NEC LCD4000e is engineered for 24/7 operation, making it suitable for environments that demand reliability and continuous output. Its durability is complemented by a robust design, which guarantees longevity and consistent performance even under heavy usage.

In summary, the NEC LCD4000e is a feature-rich large-format display that combines size, resolution, and advanced technologies to create a powerful visual tool for any professional setting. With its impressive visual quality, energy-efficient operation, and versatile connectivity options, this display is well-equipped to meet the demands of a variety of applications, ensuring that it remains a valuable asset in any organization.